From: Herbert Poetzl (herbert_at_13thfloor.at)
Date: Fri 21 Jan 2005 - 19:04:29 GMT
On Fri, Jan 21, 2005 at 01:50:17PM +0100, Holger.Manthey_at_Bertelsmann.de wrote:
> Hi,
>
> i have a strange behavior of Kernel 2.6.10-vs1.9.3.17 on SuSE 9.2. The
> kernel uses the wrong route/interface (see below). If i reboot the
> system with original suse kernel or unpatched vanilla 2.6.10 with same
> configuration, the outgoing request uses the right interface eth1.
>
> This is not inside a vserver, the only change i did was applying the
> vserver-patch and enabling CONFIG_VSERVER_HARDCPU=y, there are no
> further iptable or policy routing defines.
hmm, interesting ... will try to reproduce, maybe you
could check if the behaviour is different with 2.6.10
vanilla, or maybe this is a vendor patch issue?
> thanks in advance
> Holger Manthey
best,
Herbert
> My configuration:
>
> The 2 network devices
> eth0 inet addr:x.y.z.10 Bcast:x.y.z.127 Mask:255.255.255.128
> eth1 inet addr:172.25.128.10 Bcast:172.25.128.127
> Mask:255.255.255.128
>
> and this is my routing table
> Destination Gateway Genmask Flags MSS Window irtt
> Iface
> 172.23.152.0 172.25.128.1 255.255.255.192 UG 0 0 0
> eth1
> 172.25.128.0 0.0.0.0 255.255.255.128 U 0 0 0
> eth1
> x.y.z.0 0.0.0.0 255.255.255.128 U 0 0 0
> eth0
> 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0
> eth0
> 127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0
> lo
> 0.0.0.0 x.y.z.1 0.0.0.0 UG 0 0 0
> eth0
>
> ping 172.25.128.1
> PING 172.25.128.1 (172.25.128.1) 56(84) bytes of data.
> >From x.y.z.10: icmp_seq=2 Destination Host Unreachable
> _______________________________________________
> Vserver mailing list
> Vserver_at_list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver