Hi!
Den 30. aug. 2016 12:19, skrev Herbert Poetzl:
> On Tue, Aug 30, 2016 at 11:01:39AM +0200, Tor Rune Skoglund wrote:
>> any suggestion on the best way to let a guest address and
>> fully acontrol specified bluetooth device?
>
> You probably need to modify the kernel to allow this in
> a safe way.
>
>> It seems like hcitool creates a socket, and when it tries
>> to write to it, it fails - as expected. (The relevant part
>> of strace is below.)
>
> A raw socket with a bluetooth protocol filter.
>
>> In other cases where we need hardware access to a device
>> from a guest, we have just created the corresponding device
>> node inside the guest, but I cannot see that the "raw"
>> bluetooth device is present as a device node in /dev ... (?)
>
> Bluetooth, like IRDA or CAN is very similar to 'normal'
> networking, so it comes with all the problems associated
> with 'assigning' a 'networking' device to a guest ...
>
>> (I'm no expert on this, so I am sure that I miss some-
>> thing.... ;)
>
>> Any pointers before I start RTFM ? ;)
>
> To be honest, I haven't even tried to do something like
> this before, and I haven't heard of anybody who did it
> either, so mostly undiscovered country I guess ...
OK, thanks Herbert.
In this current case, we are controlling both the guest and the host, so
are there any capabilities or any other cheap "hack" we could do to make
a guest "bluetooth-enabled"?
BR,
Tor Rune Skoglund, trs@swi.no
>> socket(PF_BLUETOOTH, SOCK_RAW|SOCK_CLOEXEC, 1) = 3
>> ioctl(3, 0x800448d3, 0xbff1f650) = 0
>> close(3) = 0
>> socket(PF_BLUETOOTH, SOCK_RAW|SOCK_CLOEXEC, 1) = 3
>> ioctl(3, 0x800448d3, 0xbff1f690) = 0
>> close(3) = 0
>> socket(PF_BLUETOOTH, SOCK_RAW|SOCK_CLOEXEC, 1) = 3
>> bind(3, {sa_family=AF_BLUETOOTH,
>> sa_data="\0\0\0\0\0U\206\323\0\fm\267&\247"}, 6) = 0
>> setsockopt(3, SOL_IP, IP_TTL,
>> "\20\0\0\0\377\377\377\377\377\377\377\377\0\0\0\0", 16) = 0
>> fstat64(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 1), ...}) = 0
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
>> 0) = 0xb771f000
>> write(1, "< HCI Command: ogf 0x08, ocf 0x0"..., 44< HCI Command: ogf
>> 0x08, ocf 0x000a, plen 1
>> ) = 44
>> write(1, " 01 \n", 6 01
>> ) = 6
>> writev(3, [{"\1", 1}, {"\n \1", 3}, {"\1", 1}], 3) = -1 EPERM (Operation
>> not permitted)
>> dup(2) = 4
>> fcntl64(4, F_GETFL) = 0x2 (flags O_RDWR)
>> brk(0) = 0x80039000
>> brk(0x8005a000) = 0x8005a000
>> fstat64(4, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 1), ...}) = 0
>> mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
>> 0) = 0xb771e000
>> write(4, "Send failed: Operation not permi"..., 37Send failed: Operation
>> not permitted
>> ) = 37
Received on Tue Aug 30 13:50:02 2016