Linux version 2.6.22.19-vs2.3.0.34.1 (mockbuild@x86.builders.hozac.com) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #1 SMP Mon Mar 17 05:32:04 EDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cdbffc00 (usable) BIOS-e820: 00000000cdbffc00 - 00000000cdc53c00 (ACPI NVS) BIOS-e820: 00000000cdc53c00 - 00000000cdc55c00 (ACPI data) BIOS-e820: 00000000cdc55c00 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000128000000 (usable) Warning only 4GB will be used. Use a PAE enabled kernel. 3200MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000fe710 Entering add_active_range(0, 0, 1048576) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 1048576 early_node_map[1] active PFN ranges 0: 0 -> 1048576 On node 0 totalpages: 1048576 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 6400 pages used for memmap HighMem zone: 812800 pages, LIFO batch:31 DMI 2.5 present. Using APIC driver default ACPI: RSDP 000FEC00, 0024 (r2 DELL ) ACPI: XSDT 000FC7EF, 008C (r1 DELL B10K 15 ASL 61) ACPI: FACP 000FC91F, 00F4 (r3 DELL B10K 15 ASL 61) ACPI: DSDT FFF1BE4D, 53BE (r1 DELL dt_ex 1000 INTL 20050624) ACPI: FACS CDBFFC00, 0040 ACPI: SSDT FFF2132A, 00AA (r1 DELL st_ex 1000 INTL 20050624) ACPI: APIC 000FCA13, 0092 (r1 DELL B10K 15 ASL 61) ACPI: BOOT 000FCAA5, 0028 (r1 DELL B10K 15 ASL 61) ACPI: ASF! 000FCACD, 0096 (r32 DELL B10K 15 ASL 61) ACPI: MCFG 000FCB63, 003E (r1 DELL B10K 15 ASL 61) ACPI: HPET 000FCBA1, 0038 (r1 DELL B10K 15 ASL 61) ACPI: TCPA 000FCDFD, 0032 (r1 DELL B10K 15 ASL 61) ACPI: ____ 000FCE2F, 0030 (r1 DELL B10K 15 ASL 61) ACPI: SLIC 000FCBD9, 0176 (r1 DELL B10K 15 ASL 61) ACPI: SSDT CDBFFC40, 01F9 (r1 DpgPmm Cpu0Ist 11 INTL 20050624) ACPI: SSDT CDC00049, 01F9 (r1 DpgPmm Cpu1Ist 11 INTL 20050624) ACPI: SSDT CDC00452, 0190 (r1 DpgPmm CpuPm 10 INTL 20050624) ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 7:7 APIC version 20 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x8086a701 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Built 1 zonelists. Total pages: 1040384 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c0807000 soft=c07e7000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2992.673 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3328068k/4194304k available (2440k kernel code, 41680k reserved, 1242k data, 268k init, 2453500k highmem) virtual kernel memory layout: fixmap : 0xffc56000 - 0xfffff000 (3748 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc079f000 - 0xc07e2000 ( 268 kB) .data : 0xc0662293 - 0xc0798c34 (1242 kB) .text : 0xc0400000 - 0xc0662293 (2440 kB) Checking if this processor honours the WP bit even in supervisor mode... Ok. SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 64-bit timers, 14318180 Hz Calibrating delay using timer specific routine.. 5988.12 BogoMIPS (lpj=2994060) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0408e3fd 00000000 00000001 monitor/mwait feature present. using mwait in idle threads. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0408e3fd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code ACPI: Core revision 20070126 CPU0: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a SMP alternatives: switching to SMP code Booting processor 1/1 eip 3000 CPU 1 irqstacks, hard=c0808000 soft=c07e8000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5984.92 BogoMIPS (lpj=2992462) CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0408e3fd 00000000 00000001 monitor/mwait feature present. CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 6144K CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0408e3fd 00000000 00000001 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz stepping 0a Total of 2 processors activated (11973.04 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Brought up 2 CPUs migration_cost=20 PM: Adding info for No Bus:platform Time: 21:16:49 Date: 09/27/109 NET: Registered protocol family 16 PM: Adding info for No Bus:vtcon0 ACPI: bus type pci registered PCI: Using MMCONFIG Setting up standard PCI resources ACPI: System BIOS is requesting _OSI(Linux) ACPI: Please test with "acpi_osi=!Linux" Please send dmidecode to linux-acpi@vger.kernel.org ACPI: Interpreter enabled ACPI: (supports S0 S1 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PM: Adding info for acpi:acpi_system:00 PM: Adding info for acpi:button_power:00 PM: Adding info for acpi:ACPI0007:00 PM: Adding info for acpi:ACPI0007:01 PM: Adding info for acpi:ACPI0007:02 PM: Adding info for acpi:ACPI0007:03 PM: Adding info for acpi:device:00 PM: Adding info for acpi:PNP0C0C:00 PM: Adding info for acpi:PNP0A03:00 PM: Adding info for acpi:device:01 PM: Adding info for acpi:device:02 PM: Adding info for acpi:device:03 PM: Adding info for acpi:device:04 PM: Adding info for acpi:device:05 PM: Adding info for acpi:device:06 PM: Adding info for acpi:device:07 PM: Adding info for acpi:device:08 PM: Adding info for acpi:PNP0C01:00 PM: Adding info for acpi:PNP0200:00 PM: Adding info for acpi:PNP0C04:00 PM: Adding info for acpi:PNP0000:00 PM: Adding info for acpi:PNP0800:00 PM: Adding info for acpi:PNP0B00:00 PM: Adding info for acpi:PNP0100:00 PM: Adding info for acpi:PNP0401:00 PM: Adding info for acpi:PNP0501:00 PM: Adding info for acpi:device:09 PM: Adding info for acpi:device:0a PM: Adding info for acpi:device:0b PM: Adding info for acpi:device:0c PM: Adding info for acpi:device:0d PM: Adding info for acpi:device:0e PM: Adding info for acpi:PNP0C0F:00 PM: Adding info for acpi:PNP0C0F:01 PM: Adding info for acpi:PNP0C0F:02 PM: Adding info for acpi:PNP0C0F:03 PM: Adding info for acpi:PNP0C0F:04 PM: Adding info for acpi:PNP0C0F:05 PM: Adding info for acpi:PNP0C0F:06 PM: Adding info for acpi:PNP0C0F:07 PM: Adding info for acpi:PNP0103:00 PM: Adding info for acpi:thermal:00 PM: Adding info for acpi:pnp0c14:00 ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PM: Adding info for No Bus:pci0000:00 PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT] PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:02.0 PM: Adding info for pci:0000:00:02.1 PM: Adding info for pci:0000:00:03.0 PM: Adding info for pci:0000:00:03.2 PM: Adding info for pci:0000:00:03.3 PM: Adding info for pci:0000:00:19.0 PM: Adding info for pci:0000:00:1a.0 PM: Adding info for pci:0000:00:1a.1 PM: Adding info for pci:0000:00:1a.2 PM: Adding info for pci:0000:00:1a.7 PM: Adding info for pci:0000:00:1b.0 PM: Adding info for pci:0000:00:1c.0 PM: Adding info for pci:0000:00:1c.1 PM: Adding info for pci:0000:00:1d.0 PM: Adding info for pci:0000:00:1d.1 PM: Adding info for pci:0000:00:1d.2 PM: Adding info for pci:0000:00:1d.7 PM: Adding info for pci:0000:00:1e.0 PM: Adding info for pci:0000:00:1f.0 PM: Adding info for pci:0000:00:1f.2 PM: Adding info for pci:0000:00:1f.3 PM: Adding info for pci:0000:03:00.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15) ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 ACPI: bus type pnp registered PM: Adding info for pnp:00:00 PM: Adding info for pnp:00:01 PM: Adding info for pnp:00:02 PM: Adding info for pnp:00:03 PM: Adding info for pnp:00:04 PM: Adding info for pnp:00:05 PM: Adding info for pnp:00:06 PM: Adding info for pnp:00:07 PM: Adding info for pnp:00:08 pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 pnp: 00:01: ioport range 0x800-0x85f has been reserved pnp: 00:01: ioport range 0xc00-0xc7f has been reserved pnp: 00:01: ioport range 0x860-0x8ff has been reserved PM: Adding info for No Bus:mem PM: Adding info for No Bus:kmem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg PM: Adding info for No Bus:oldmem Time: tsc clocksource has been installed. Switched to high resolution mode on CPU 0 Switched to high resolution mode on CPU 1 PCI: Bridge: 0000:00:1c.0 IO window: disabled. MEM window: fe500000-fe5fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1c.1 IO window: disabled. MEM window: fe400000-fe4fffff PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: d000-dfff MEM window: fe200000-fe3fffff PREFETCH window: f0000000-f00fffff ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1c.0 to 64 ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1c.1 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1572864 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3071k freed Simple Boot Flag at 0x7a set to 0x1 apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. PM: Adding info for platform:pcspkr PM: Adding info for No Bus:snapshot audit: initializing netlink socket (disabled) audit(1256678211.009:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) Boot video device is 0000:00:02.0 0000:00:1d.7 EHCI: BIOS handoff failed (BIOS bug ?) 01010001 PCI: Setting latency timer of device 0000:00:1c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.0:pcie00] PM: Adding info for pci_express:0000:00:1c.0:pcie00 Allocate Port Service[0000:00:1c.0:pcie02] PM: Adding info for pci_express:0000:00:1c.0:pcie02 Allocate Port Service[0000:00:1c.0:pcie03] PM: Adding info for pci_express:0000:00:1c.0:pcie03 PCI: Setting latency timer of device 0000:00:1c.1 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:1c.1:pcie00] PM: Adding info for pci_express:0000:00:1c.1:pcie00 Allocate Port Service[0000:00:1c.1:pcie02] PM: Adding info for pci_express:0000:00:1c.1:pcie02 Allocate Port Service[0000:00:1c.1:pcie03] PM: Adding info for pci_express:0000:00:1c.1:pcie03 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PM: Adding info for platform:vesafb.0 Monitor-Mwait will be used to enter C-1 state ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126] PM: Adding info for No Bus:pnp1 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:ptmx PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 PM: Adding info for No Bus:hpet hpet_resources: 0xfed00000 is busy Generic RTC Driver v1.07 PM: Adding info for No Bus:rtc PM: Adding info for No Bus:nvram Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled PM: Adding info for platform:serial8250 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PM: Adding info for No Bus:ttyS0 PM: Adding info for No Bus:ttyS1 PM: Adding info for No Bus:ttyS2 PM: Adding info for No Bus:ttyS3 PM: Removing info for No Bus:ttyS0 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A PM: Adding info for No Bus:ttyS0 ACPI: PCI Interrupt 0000:00:03.3[B] -> GSI 17 (level, low) -> IRQ 17 PM: Removing info for No Bus:ttyS1 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A PM: Adding info for No Bus:ttyS1 PM: Adding info for No Bus:isa RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize vroot: loaded (max 8 devices) PM: Adding info for No Bus:lo input: Macintosh mouse button emulation as /class/input/input0 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... Probing IDE interface ide1... ide-floppy driver 0.99.newide PNP: No PS/2 controller found. Probing ports directly. PM: Adding info for platform:i8042 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 PM: Adding info for serio:serio0 PM: Adding info for serio:serio1 mice: PS/2 mouse device common for all mice usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 NET: Registered protocol family 17 Using IPI No-Shortcut mode Magic number: 13:3:299 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 268k freed Write protecting the kernel read-only data: 942k PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.7 to 64 ehci_hcd 0000:00:1a.7: EHCI Host Controller ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1a.7 ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfe6da000 ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PM: Adding info for usb:usb1 PM: Adding info for No Bus:usbdev1.1_ep00 usb usb1: configuration #1 chosen from 1 choice PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected PM: Adding info for No Bus:usbdev1.1_ep81 PM: Adding info for No Bus:usbdev1.1 ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 19, io mem 0xff980000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 PM: Adding info for usb:usb2 PM: Adding info for No Bus:usbdev2.1_ep00 usb usb2: configuration #1 chosen from 1 choice PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: USB hub found hub 2-0:1.0: 6 ports detected PM: Adding info for No Bus:usbdev2.1_ep81 PM: Adding info for No Bus:usbdev2.1 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1a.0 to 64 uhci_hcd 0000:00:1a.0: UHCI Host Controller uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 PM: Adding info for usb:usb3 PM: Adding info for No Bus:usbdev3.1_ep00 usb usb3: configuration #1 chosen from 1 choice PM: Adding info for usb:3-0:1.0 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev3.1_ep81 PM: Adding info for No Bus:usbdev3.1 ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1a.1 to 64 uhci_hcd 0000:00:1a.1: UHCI Host Controller uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 PM: Adding info for usb:usb4 PM: Adding info for No Bus:usbdev4.1_ep00 usb usb4: configuration #1 chosen from 1 choice PM: Adding info for usb:4-0:1.0 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev4.1_ep81 PM: Adding info for No Bus:usbdev4.1 ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 22 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1a.2 to 64 uhci_hcd 0000:00:1a.2: UHCI Host Controller uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000fc00 PM: Adding info for usb:usb5 PM: Adding info for No Bus:usbdev5.1_ep00 usb usb5: configuration #1 chosen from 1 choice PM: Adding info for usb:5-0:1.0 hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev5.1_ep81 PM: Adding info for No Bus:usbdev5.1 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000ff80 PM: Adding info for usb:usb6 PM: Adding info for No Bus:usbdev6.1_ep00 usb usb6: configuration #1 chosen from 1 choice PM: Adding info for usb:6-0:1.0 hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev6.1_ep81 PM: Adding info for No Bus:usbdev6.1 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 PM: Adding info for usb:usb7 PM: Adding info for No Bus:usbdev7.1_ep00 usb usb7: configuration #1 chosen from 1 choice PM: Adding info for usb:7-0:1.0 hub 7-0:1.0: USB hub found hub 7-0:1.0: 2 ports detected usb 3-2: new low speed USB device using uhci_hcd and address 2 PM: Adding info for No Bus:usbdev7.1_ep81 PM: Adding info for No Bus:usbdev7.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000ff40 PM: Adding info for usb:usb8 PM: Adding info for No Bus:usbdev8.1_ep00 usb usb8: configuration #1 chosen from 1 choice PM: Adding info for usb:8-0:1.0 hub 8-0:1.0: USB hub found hub 8-0:1.0: 2 ports detected PM: Adding info for No Bus:usbdev8.1_ep81 PM: Adding info for No Bus:usbdev8.1 PM: Adding info for usb:3-2 PM: Adding info for No Bus:usbdev3.2_ep00 usb 3-2: configuration #1 chosen from 1 choice PM: Adding info for usb:3-2:1.0 SCSI subsystem initialized libata version 2.21 loaded. ahci 0000:00:1f.2: version 2.2 ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 18 (level, low) -> IRQ 20 input: USB Optical Mouse as /class/input/input1 input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1a.0-2 PM: Adding info for No Bus:usbdev3.2_ep81 PM: Adding info for No Bus:usbdev3.2 usb 8-1: new full speed USB device using uhci_hcd and address 2 PM: Adding info for usb:8-1 PM: Adding info for No Bus:usbdev8.2_ep00 usb 8-1: configuration #1 chosen from 1 choice PM: Adding info for usb:8-1:1.0 hub 8-1:1.0: USB hub found hub 8-1:1.0: 3 ports detected PM: Adding info for No Bus:usbdev8.2_ep81 PM: Adding info for No Bus:usbdev8.2 usb 8-1.1: new low speed USB device using uhci_hcd and address 3 PM: Adding info for usb:8-1.1 PM: Adding info for No Bus:usbdev8.3_ep00 usb 8-1.1: configuration #1 chosen from 1 choice PM: Adding info for usb:8-1.1:1.0 input: Dell Dell Multimedia Pro Keyboard as /class/input/input2 input: USB HID v1.10 Keyboard [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1d.2-1.1 PM: Adding info for No Bus:usbdev8.3_ep81 PM: Adding info for usb:8-1.1:1.1 input: Dell Dell Multimedia Pro Keyboard as /class/input/input3 input: USB HID v1.10 Device [Dell Dell Multimedia Pro Keyboard] on usb-0000:00:1d.2-1.1 PM: Adding info for No Bus:usbdev8.3_ep82 PM: Adding info for No Bus:usbdev8.3 ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq led clo pio PCI: Setting latency timer of device 0000:00:1f.2 to 64 scsi0 : ahci PM: Adding info for No Bus:host0 scsi1 : ahci PM: Adding info for No Bus:host1 scsi2 : ahci PM: Adding info for No Bus:host2 scsi3 : ahci PM: Adding info for No Bus:host3 scsi4 : ahci PM: Adding info for No Bus:host4 scsi5 : ahci PM: Adding info for No Bus:host5 ata1: SATA max UDMA/133 cmd 0xf8846100 ctl 0x00000000 bmdma 0x00000000 irq 221 ata2: SATA max UDMA/133 cmd 0xf8846180 ctl 0x00000000 bmdma 0x00000000 irq 221 ata3: SATA max UDMA/133 cmd 0xf8846200 ctl 0x00000000 bmdma 0x00000000 irq 221 ata4: SATA max UDMA/133 cmd 0xf8846280 ctl 0x00000000 bmdma 0x00000000 irq 221 ata5: SATA max UDMA/133 cmd 0xf8846300 ctl 0x00000000 bmdma 0x00000000 irq 221 ata6: SATA max UDMA/133 cmd 0xf8846380 ctl 0x00000000 bmdma 0x00000000 irq 221 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: WDC WD2500AAJS-75M0A0, 02.03E02, max UDMA/133 ata1.00: 488281250 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata2.00: ATAPI: HL-DT-ST DVD+/-RW GH50N, B101, max UDMA/100 ata2.00: configured for UDMA/100 ata3: SATA link down (SStatus 4 SControl 300) ata4: SATA link down (SStatus 4 SControl 300) ata5: SATA link down (SStatus 0 SControl 0) ata6: SATA link down (SStatus 0 SControl 300) PM: Adding info for No Bus:target0:0:0 scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAJS-7 02.0 PQ: 0 ANSI: 5 PM: Adding info for scsi:0:0:0:0 sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488281250 512-byte hardware sectors (250000 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 sd 0:0:0:0: [sda] Attached SCSI disk PM: Adding info for No Bus:target1:0:0 scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GH50N B101 PQ: 0 ANSI: 5 PM: Adding info for scsi:1:0:0:0 PM: Adding info for No Bus:device-mapper device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1256678243.504:2): selinux=0 auid=4294967295 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for No Bus:rtc0 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day Linux Tulip driver version 1.1.15 (Feb 27, 2007) ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PM: Adding info for No Bus:eth0 eth0: Lite-On PNIC-II rev 37 at MMIO 0xfe2ff000, 00:C0:F0:6C:08:F5, IRQ 16. parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 1:0:0:0: Attached scsi CD-ROM sr0 Floppy drive(s): fd0 is 1.44M sd 0:0:0:0: Attached scsi generic sg0 type 0 sr 1:0:0:0: Attached scsi generic sg1 type 5 PM: Adding info for platform:parport_pc.956 PM: Removing info for platform:parport_pc.956 PM: Adding info for platform:parport_pc.888 PM: Removing info for platform:parport_pc.888 PM: Adding info for platform:parport_pc.632 PM: Removing info for platform:parport_pc.632 floppy0: no floppy controllers found Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found lp0: using parport0 (interrupt-driven). lp0: console ready PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 PM: Removing info for No Bus:vcs8 PM: Removing info for No Bus:vcsa8 PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 PM: Removing info for No Bus:vcs8 PM: Removing info for No Bus:vcsa8 PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 No dock devices found. ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: found ejectable bay ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: Adding notify handler PM: Adding info for platform:bay.0 ACPI: Bay [\_SB_.PCI0.IDE1.PRI1.MAS1] Added input: Power Button (FF) as /class/input/input4 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input5 ACPI: Power Button (CM) [VBTN] md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 5373944k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:5373944k PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:microcode PM: Adding info for platform:microcode PM: Adding info for No Bus:microcode PM: Removing info for No Bus:microcode PM: Adding info for No Bus:microcode PM: Removing info for No Bus:microcode IA-32 Microcode Update Driver: v1.14a PM: Removing info for No Bus:microcode PM: Removing info for platform:microcode ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (8192 buckets, 65536 max) ---------------------------------------------------- Uhhuh. NMI received for unknown reason a1 on CPU 0. You have some hardware problem, likely on the PCI bus. Dazed and confused, but trying to continue audit(1256678273.988:3): audit_pid=2684 old=0 by auid=4294967295 ------------------------------------------------------------------ Bluetooth: Core ver 2.11 PM: Adding info for platform:bluetooth NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: HIDP (Human Interface Emulation) ver 1.2 eth0: no IPv6 routers present PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Removing info for No Bus:vcs4 PM: Removing info for No Bus:vcsa4 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Adding info for No Bus:vcs5 PM: Removing info for No Bus:vcs2 PM: Removing info for No Bus:vcsa2 PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Removing info for No Bus:vcs1 PM: Removing info for No Bus:vcsa1 PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for No Bus:vcsa5 PM: Removing info for No Bus:vcs5 PM: Removing info for No Bus:vcsa5 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Removing info for No Bus:vcs3 PM: Removing info for No Bus:vcsa3 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Removing info for No Bus:vcs6 PM: Removing info for No Bus:vcsa6 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Removing info for No Bus:vcs8 PM: Removing info for No Bus:vcsa8 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 PM: Removing info for No Bus:vcs7 PM: Removing info for No Bus:vcsa7 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 [drm] Initialized drm 1.1.0 20060810 vxW: [»bash«,4372:#40041|40041|40041] did lookup hidden f4fa4580[#0,3] »/dev/pts/1«. vxW: [»crond«,4930:#40041|40041|40041] messing with the procfs. vxW: [»crond«,4934:#40041|40041|40041] messing with the procfs. vxW: [»crond«,4992:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5052:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5118:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5209:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5212:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5270:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5337:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5397:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5488:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5491:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5556:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5758:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5818:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5878:#40041|40041|40041] messing with the procfs. vxW: [»crond«,5918:#40041|40041|40041] messing with the procfs. vxW: [»crond«,6246:#40041|40041|40041] messing with the procfs. vxW: [»crond«,6310:#40041|40041|40041] messing with the procfs. vxW: [»crond«,6369:#40041|40041|40041] messing with the procfs. vxW: [»crond«,6436:#40041|40041|40041] messing with the procfs. vxW: [»crond«,6439:#40041|40041|40041] messing with the procfs. vxW: [»crond«,6497:#40041|40041|40041] messing with the procfs. vxW: [»crond«,6614:#40041|40041|40041] messing with the procfs. vxW: [»crond«,6732:#40041|40041|40041] messing with the procfs. vxW: [»crond«,6823:#40041|40041|40041] messing with the procfs. vxW: [»crond«,6826:#40041|40041|40041] messing with the procfs. vxW: [»crond«,6885:#40041|40041|40041] messing with the procfs.