Re: [vserver] how to use more than one IP in the same interface in guest with new config

From: Guenther Fuchs <vserver_at_muh.at>
Date: Mon 03 Mar 2008 - 10:46:10 GMT
Message-ID: <1115533799.20080303114610@fuchs.info>

Hi there,

on Monday, March 3, 2008 at 9:34:31 AM there was posted:

BG> If you did want to create a eth0:0 then two things are necessary,
BG> firstly you need to make sure there is a eth0:0 on the host
BG> machine,

Based on your value:

BG> /etc/vservers/example/interfaces/0/dev = eth0
BG> /etc/vservers/example/interfaces/0/name = 0

it is definately _not_ necessary to have this set up on the host to
have an "eth0:0" if, no. The "dev" with "eth0" and "name" with "0"
leads already to the creation on guest start, so there's no need for
an extra setup on the host beside the vserver config files.

-- 
regards 'n greez,
Guenther Fuchs
(aka "muh" and "powerfox")
Received on Mon Mar 3 10:41:27 2008
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Mon 03 Mar 2008 - 10:41:30 GMT by hypermail 2.1.8