RE: [Vserver] vserver@crux

From: <smagnuson_at_forzani.com>
Date: Wed 19 Apr 2006 - 17:45:49 BST
Message-ID: <511A30B014A7DF42902B680EA85C07DC089E510C@CALMAIL01.fglcorporate.net>

Yes as Herbert notes from your output: Use dietlibc: no (you have been
warned)

I think you may have overlooked the following line from the crux install
notes: sudo prt-get install dietlibc

I believe you need to use dietlibc, I had troubles without it. Herbert
suggested I try it. All worked fine after. If you search the ml/irc
archives at the very least you'll find my issues.

I have included a snippet below.

Not running make install-distribution did not seem to cause me any
issues. But it is prob worthwhile running.

Sig

>>>>>>-----Original Message-----
>>>>>>From: vserver-bounces@list.linux-vserver.org
[mailto:vserver->>>>>>bounces@list.linux-vserver.org] On Behalf Of
Magnuson, Sig
>>>>>>Sent: Wednesday, August 24, 2005 9:34 PM
>>>>>>Cc: vserver@list.linux-vserver.org
>>>>>>Subject: RE: [Vserver] unable to stop the vserver after upgrade

>>>>>>Herbert thanks for your help.

>>>>>>Issue: Unable to stop vserver, everything else appears to work
fine.

>>>>>>Issue was resolved when dietlibc was installed and tools
recompiled

>>>>>>EG:
>>>>>>Installed dietlibc
>>>>>>cd /path/to/vserver/src/util-vserver-0.30.208
>>>>>>make uninstall
>>>>>>make clean
>>>>>>./configure
>>>>>>make
>>>>>>make install

>>>>>>Note: allowed ./configure to autodetect dietlibc

>>>>>>from config.log
>>>>>>...
>>>>>>configure:9473: checking whether to enable dietlibc
>>>>>>configure:9533: result: yes (autodetected, 0.29)
>>>>>>...

>>>>>>Thanks,
>>>>>>sig

-----Original Message-----
From: vserver-bounces@list.linux-vserver.org
[mailto:vserver-bounces@list.linux-vserver.org] On Behalf Of Herbert
Poetzl
Sent: Wednesday, April 19, 2006 10:13 AM
To: Falk Hamann
Cc: vserver@list.linux-vserver.org
Subject: Re: [Vserver] vserver@crux

On Wed, Apr 19, 2006 at 11:50:09AM +0200, Falk Hamann wrote:
> On Thu, 13 Apr 2006 08:55:18 -0600
> <smagnuson@forzani.com> wrote:
>
> >
> > See the previous post regarding crux documentation. If still having
> > issues, do the following. It will probably help people troubleshoot
> > your issue.
> >
> > Download, run and paste output back to list
> > http://vserver.13thfloor.at/Stuff/SCRIPT/testme.sh
>
> This program is part of util-vserver 0.30.209
>
> Copyright (C) 2004 Enrico Scholz
> This program is free software; you may redistribute it under the terms
> of the GNU General Public License. This program has absolutely no
> warranty. Linux 2.6.16.1 #3 SMP Fri Apr 7 09:44:20 CEST 2006 i686
> Ea 0.30.209 273/glibc (S*)
<compat,v11,v13,fscompat,net,oldproc,olduts>
> VCI: 0002:0001 273 03000016 (TbLgnP)
> (root@butler)
> (gcc version 4.0.3 (CRUX))
> #3 SMP Fri Apr 7 09:44:20 CEST 2006
> ---
> [000]# chcontext true && chcontext --xid 45678 true
> [000]# succeeded.
> [001]# chcontext --xid 45678 egrep 'context|VxID' /proc/self/status
> [001]# succeeded.
> [011]# chcontext --secure --xid 45678 mknod /tmp/testme.sh.LT1693/node
> c 0 0 [011]# succeeded.
> [031]# chcontext --hostname zaphod.1690 uname -a | grep -q
zaphod.1690
> [031]# succeeded.
> [101]# chbind --ip 192.168.0.42 true
> [101]# succeeded.
> [102]# chbind --ip 192.168.0.1/255.255.255.0 --ip 10.0.0.1/24 true
> [102]# succeeded.
> [201]# chcontext --xid 45678 --flag fakeinit bash -c 'test $$ -eq 1'
> [201]# succeeded.
> [202]# chcontext --flag fakeinit bash -c 'test $$ -eq 1'
> [202]# succeeded.
>
> The testscript works well.

looks good, yes ...

> > Run and paste output back to list
> > ./vserver-info
>
> root@butler ~# vserver-info
> Versions:
> Kernel: 2.6.16.1
> VS-API: 0x00020001
> util-vserver: 0.30.209; Apr 12 2006, 15:07:54
>
> Features:
> CC: gcc, gcc (GCC) 4.0.3 (CRUX)
> CXX: g++, g++ (GCC) 4.0.3 (CRUX)
> CPPFLAGS: ''
> CFLAGS: '-O2 -march=i686 -pipe -std=c99 -Wall
> -pedantic -W -funit-at-a-time' CXXFLAGS: '-O2 -march=i686 -pipe -ansi
> -Wall -pedantic -W -fmessage-length=0 -funit-at-a-time' build/host:
> i686-pc-linux-gnu/i686-pc-linux-gnu
> Use dietlibc: no (you have been warned)
                        ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
you have been warned :)

> Build C++ programs: yes
> Build C99 programs: yes
> Available APIs: compat,v11,v13,fscompat,net,oldproc,olduts
                             ~~~~~~

this one should not be required anymore, you can remove
it when configuring with --enable-apis=NOLEGACY IIRC

> ext2fs Source: e2fsprogs
> syscall(2) invocation: fast
> vserver(2) syscall#: 273/glibc
>
> Paths:
> prefix: /usr
> sysconf-Directory: /etc
> cfg-Directory: /etc/vservers
> initrd-Directory: /etc/rc.d
> pkgstate-Directory: ${prefix}/var/run/vservers
> vserver-Rootdir: /vservers
>
>
> Assumed 'SYSINFO' as no other option given; try '--help' for more
> information.
>
> > So the host is crux (version ??)
> > So the guest is crux (version ??)
>
> Both are CRUX 2.2.
>
> vserver started in debug-mode. I hope these infos help solve the
problem.
>
> root@butler ~# vserver --debug vcrux01 start
> + shift
> + true
> + case "$1" in
> + shift
> + break
> + OPTION_ALL=($OPTION_SILENT $OPTION_VERBOSE $OPTION_DEBUG
$OPTION_DEFAULTTTY)
> + SELF=("$0" "${OPTION_ALL[@]}")
> + vserver=vcrux01
> + cmd=start
> + test start '!=' build
> + allow_legacy=
> + case "$vserver" in
> + VSERVER_DIR=/etc/vservers/vcrux01
> + allow_legacy=1
> + test -n 1
> + do_legacy=
> + test '!' -e /etc/vservers/vcrux01/legacy
> + test -d /etc/vservers/vcrux01 -o '!' -e /etc/vservers/vcrux01.conf
> + test -z ''
> + test -d /etc/vservers/vcrux01
> + test -e /etc/vservers/vcrux01/name
> + read VSERVER_NAME
> + test start '!=' start -o -n ''
> + isAvoidNamespace /etc/vservers/vcrux01
> + local cfgdir
> + /usr/sbin/vserver-info - FEATURE namespace
> ++ /usr/sbin/vserver-info /etc/vservers/vcrux01 CFGDIR
> + cfgdir=/etc/vservers/vcrux01
> + test '!' -e /etc/vservers/vcrux01/namespace
> + test -e /etc/vservers/.defaults/nonamespace -o -e
/etc/vservers/vcrux01/nonamespace
> + exec /usr/sbin/vnamespace --new -- /usr/sbin/vserver ----nonamespace
--debug vcrux01 start 2
> + shift
> + true
> + case "$1" in
> + shift
> + break
> + OPTION_ALL=($OPTION_SILENT $OPTION_VERBOSE $OPTION_DEBUG
$OPTION_DEFAULTTTY)
> + SELF=("$0" "${OPTION_ALL[@]}")
> + vserver=vcrux01
> + cmd=start
> + test start '!=' build
> + allow_legacy=
> + case "$vserver" in
> + VSERVER_DIR=/etc/vservers/vcrux01
> + allow_legacy=1
> + test -n 1
> + do_legacy=
> + test '!' -e /etc/vservers/vcrux01/legacy
> + test -d /etc/vservers/vcrux01 -o '!' -e /etc/vservers/vcrux01.conf
> + test -z ''
> + test -d /etc/vservers/vcrux01
> + test -e /etc/vservers/vcrux01/name
> + read VSERVER_NAME
> + test start '!=' start -o -n ----nonamespace
> + . /usr/lib/util-vserver/vserver.functions
> ++ declare -a 'NICE_CMD=()'
> ++ declare -a 'CHBIND_OPTS=()'
> ++ declare -a 'CAP_OPTS=()'
> ++ declare -a 'CHCONTEXT_INIT_OPTS=()'
> ++ declare -a 'CHCONTEXT_FLAG_OPTS=()'
> ++ declare -a 'CHCONTEXT_OPTS=()'
> ++ declare -a 'CAPCHROOT_OPTS=()'
> ++ declare -a 'INTERFACES=()'
> ++ declare -a 'INITCMD_RESCUE=(/bin/sleep 900)'
> ++ declare -a 'INITCMD_START=()'
> ++ declare -a 'INITCMD_START_SYNC=()'
> ++ declare -a 'INITCMD_STOP=()'
> ++ declare -a 'INITCMD_STOP_SYNC=()'
> ++ declare -a 'INITCMD_PREPARE=()'
> ++ declare -a 'INITKILL_SEQ=()'
> ++ declare -a 'ENTER_SHELL=()'
> ++ declare -a 'OPTS_VCONTEXT_CREATE=()'
> ++ declare -a 'OPTS_VCONTEXT_MIGRATE=()'
> ++ declare -a 'OPTS_VCONTEXT_ENTER=()'
> ++ declare -a 'OPTS_VATTRIBUTE=(--flag fakeinit)'
> ++ declare -a 'OPTS_VSCHED=()'
> ++ declare -a 'STOPCMD_PREPARE=()'
> ++ declare -a 'VSERVER_EXTRA_CMDS=()'
> ++ INIT_RESCUE=
> ++ VSHELPER_SYNC_TIMEOUT=30
> ++ USE_VNAMESPACE=
> ++ INTERFACE_CMDS_IDX=0
> ++ RUNLEVEL_START=
> ++ RUNLEVEL_STOP=
> ++ _HAVE_INTERFACE_OPTIONS=
> ++ _HAVE_CHBIND_OPTIONS=
> ++ _NEED_VSHELPER_SYNC=
> ++ _IS_FAKEINIT=
> ++ INITSTYLE=sysv
> ++ S_CONTEXT=
> ++ SILENT_OPT=
> ++ : vcrux01
> ++ test -e /etc/vservers/vcrux01/noisy -o -n ''
> ++ SILENT_OPT=--silent
> + case "$2" in
> + shift 2
> + . /usr/lib/util-vserver/vserver.start
> +++ /usr/sbin/vserver-info /etc/vservers/vcrux01 CANONIFY
> ++ lock /var/lock/vserver.etcvserversvcrux01.startup
> +++ /usr/bin/mktemp /tmp/vserver-lock.XXXXXX
> ++ local tmp=/tmp/vserver-lock.SZ2033
> ++ /bin/rm -f /tmp/vserver-lock.SZ2033
> ++ /usr/bin/mkfifo -m600 /tmp/vserver-lock.SZ2033
> ++ /usr/lib/util-vserver/lockfile
/var/lock/vserver.etcvserversvcrux01.startup /tmp/vserver-lock.SZ2033
> ++ /usr/bin/grep -q true /tmp/vserver-lock.SZ2033
> ++ _VS_LOCKS='2036 '
> ++ isVserverRunning /etc/vservers/vcrux01
> ++ local _ivr_ctx _ivr_procnum
> ++ getVserverStatus /etc/vservers/vcrux01 _ivr_ctx _ivr_procnum 1
> ++ test -r /etc/vservers/vcrux01/run
> ++ return 1
> ++ return 1
> ++ is_configured=
> ++ is_executed=
> ++ is_started=
> ++ is_mounted=
> ++ is_vshelper_init=
> ++ have_interfaces=
> ++ startsync_pipe=
> ++ have_initcmd=
> ++ test 1 -gt 0
> ++ case "$1" in
> ++ break
> ++ test xsysv = xrescue -a -z '' -a 1 -gt 0
> ++ set -e
> ++ trap cleanup EXIT
> ++ sanityCheck /etc/vservers/vcrux01
> ++ declare -r cfgdir=/etc/vservers/vcrux01
> ++ test -e /etc/vservers/vcrux01/fstab.local
> ++ test -e /etc/vservers/vcrux01/hostname -a '!' -L
/etc/vservers/vcrux01/hostname
> ++ test -e /etc/vservers/vcrux01/domainname -a '!' -L
/etc/vservers/vcrux01/domainname
> ++ local i
> ++ for i in '"$cfgdir"/interfaces/*/only_ip'
> ++ test -e '/etc/vservers/vcrux01/interfaces/*/only_ip'
> ++ find /etc/vservers/vcrux01 -type f -exec
/usr/lib/util-vserver/check-unixfile '{}' ';'
> ++ vshelper.doSanityCheck
> ++ local vshelper this_xid i
> ++ declare -a 'warnings=()'
> ++ local solution_disable=
> ++ local solution_sysctl=
> ++ vshelper.isEnabled
> ++ local f=disabled
> ++ test '!' -e /etc/vservers/.defaults/apps/vshelper/disabled
> ++ /usr/sbin/vserver-info - FEATURE vshelper
> ++ test -n ''
> ++ return 0
> ++ vshelper.isEnabled warning
> ++ local f=warning-disabled
> ++ test '!' -e /etc/vservers/.defaults/apps/vshelper/warning-disabled
> ++ /usr/sbin/vserver-info - FEATURE vshelper
> ++ test -n ''
> ++ return 0
> +++ /usr/sbin/vserver-info - XID
> ++ this_xid=0
> ++ test 0 = 0
> ++ local proc_file=/proc/sys/kernel/vshelper
> ++ test -r /proc/sys/kernel/vshelper
> +++ cat /proc/sys/kernel/vshelper
> ++ vshelper=/usr/lib/util-vserver/vshelper
> ++ /usr/bin/cmp -s /usr/lib/util-vserver/vshelper
/usr/lib/util-vserver/vshelper
> ++ test -d /usr/var/run/vshelper
> ++ test 0 -eq 0
> ++ return 0
> ++ /usr/sbin/vserver-info - VERIFYCAP
> ++ /usr/sbin/vserver-info - VERIFYPROC
> ++ mountRootFS /etc/vservers/vcrux01
> ++ local cfgdir=/etc/vservers/vcrux01
> ++ local vdir=/etc/vservers/vcrux01/vdir
> ++ local fstab=/etc/vservers/vcrux01/fstab
> ++ local xflag=
> ++ test -e /etc/vservers/vcrux01/fstab
> ++ pushd /etc/vservers/vcrux01/vdir
> ++ test -w etc -o -w etc/mtab
> ++ /usr/lib/util-vserver/secure-mount -a --chroot --fstab
/etc/vservers/vcrux01/fstab --rootfs only -n
> ++ popd
> ++ generateOptions /etc/vservers/vcrux01
> ++ _generateInterfaceOptions /etc/vservers/vcrux01
> ++ local iface
> ++ local ctx
> ++ test '!' -e /etc/vservers/vcrux01/context
> ++ read ctx
> ++ for iface in '"$1/interfaces/"*'
> ++ test -d /etc/vservers/vcrux01/interfaces/0
> ++ test '!' -e /etc/vservers/vcrux01/interfaces/0/disabled
> ++ _processSingleInterface /etc/vservers/vcrux01/interfaces/0
> ++ local iface=/etc/vservers/vcrux01/interfaces/0
> ++ local ip
> ++ local dev
> ++ local prefix
> ++ local mask
> ++ local bcast
> ++ local name
> ++ local scope
> ++ local mac
> ++ local extip
> ++ local up=up
> ++ _getInterfaceValue ip '' /etc/vservers/vcrux01/interfaces/0
> ++ local _giv_val=ip
> ++ local _giv_dflt=
> ++ shift 2
> ++ local _giv_i
> ++ local _giv_tmp
> ++ : 192.168.1.233
> ++ eval 'ip=$_giv_tmp'
> +++ ip=192.168.1.233
> ++ _getInterfaceValue extip '' /etc/vservers/vcrux01/interfaces/0
/etc/vservers/vcrux01/interfaces/0/..
> ++ local _giv_val=extip
> ++ local _giv_dflt=
> ++ shift 2
> ++ local _giv_i
> ++ local _giv_tmp
> ++ :
> ++ eval 'extip=$_giv_tmp'
> +++ extip=
> ++ _getInterfaceValue dev '' /etc/vservers/vcrux01/interfaces/0
/etc/vservers/vcrux01/interfaces/0/..
> ++ local _giv_val=dev
> ++ local _giv_dflt=
> ++ shift 2
> ++ local _giv_i
> ++ local _giv_tmp
> ++ : eth0
> ++ eval 'dev=$_giv_tmp'
> +++ dev=eth0
> ++ _getInterfaceValue prefix '' /etc/vservers/vcrux01/interfaces/0
/etc/vservers/vcrux01/interfaces/0/..
> ++ local _giv_val=prefix
> ++ local _giv_dflt=
> ++ shift 2
> ++ local _giv_i
> ++ local _giv_tmp
> ++ :
> ++ eval 'prefix=$_giv_tmp'
> +++ prefix=
> ++ _getInterfaceValue mask '' /etc/vservers/vcrux01/interfaces/0
/etc/vservers/vcrux01/interfaces/0/..
> ++ local _giv_val=mask
> ++ local _giv_dflt=
> ++ shift 2
> ++ local _giv_i
> ++ local _giv_tmp
> ++ : 255.255.254.0
> ++ eval 'mask=$_giv_tmp'
> +++ mask=255.255.254.0
> ++ _getInterfaceValue bcast '' /etc/vservers/vcrux01/interfaces/0
/etc/vservers/vcrux01/interfaces/0/..
> ++ local _giv_val=bcast
> ++ local _giv_dflt=
> ++ shift 2
> ++ local _giv_i
> ++ local _giv_tmp
> ++ :
> ++ eval 'bcast=$_giv_tmp'
> +++ bcast=
> ++ _getInterfaceValue name '' /etc/vservers/vcrux01/interfaces/0
> ++ local _giv_val=name
> ++ local _giv_dflt=
> ++ shift 2
> ++ local _giv_i
> ++ local _giv_tmp
> ++ : c01
> ++ eval 'name=$_giv_tmp'
> +++ name=c01
> ++ _getInterfaceValue scope '' /etc/vservers/vcrux01/interfaces/0
/etc/vservers/vcrux01/interfaces/0/..
> ++ local _giv_val=scope
> ++ local _giv_dflt=
> ++ shift 2
> ++ local _giv_i
> ++ local _giv_tmp
> ++ :
> ++ eval 'scope=$_giv_tmp'
> +++ scope=
> ++ _getInterfaceValue mac '' /etc/vservers/vcrux01/interfaces/0
> ++ local _giv_val=mac
> ++ local _giv_dflt=
> ++ shift 2
> ++ local _giv_i
> ++ local _giv_tmp
> ++ :
> ++ eval 'mac=$_giv_tmp'
> +++ mac=
> ++ test -n 192.168.1.233
> ++ test -n eth0 -o -e /etc/vservers/vcrux01/interfaces/0/nodev
> ++ test '!' -e /etc/vservers/vcrux01/interfaces/0/down
> ++ true
> ++ _transformMask2Prefix prefix '' 255.255.254.0
> ++ local _tm2p_tmp=
> ++ test -n ''
> ++ /usr/lib/util-vserver/mask2prefix 255.255.254.0
> ++ _tm2p_tmp=23
> ++ eval 'prefix=$_tm2p_tmp'
> +++ prefix=23
> ++ return 0
> ++ INTERFACES=("${INTERFACES[@]}" "$ip${prefix:+/$prefix}")
> ++ test '!' -e /etc/vservers/vcrux01/interfaces/0/nodev
> ++ test '!' -e /etc/vservers/vcrux01/interfaces/0/only_ip
> ++ local vlan_info
> +++ _getVLANInfo eth0
> +++ case "$1" in
> +++ return 1
> ++ vlan_info=
> ++ test -e /etc/vservers/vcrux01/interfaces/0/indirect
> ++ _addInterfaceCmd IP_ADDR 192.168.1.233/23 broadcast + label
eth0:c01 dev eth0
> ++ eval 'INTERFACE_CMDS_0=( "$@" )'
> +++ INTERFACE_CMDS_0=("$@")
> ++ let ++INTERFACE_CMDS_IDX
> ++ _addInterfaceCmd IP_LINK eth0 up
> ++ eval 'INTERFACE_CMDS_1=( "$@" )'
> +++ INTERFACE_CMDS_1=("$@")
> ++ let ++INTERFACE_CMDS_IDX
> ++ break
> ++ for iface in '"$1/interfaces/"*'
> ++ test -d /etc/vservers/vcrux01/interfaces/dev
> ++ continue
> ++ for iface in '"$1/interfaces/"*'
> ++ test -d /etc/vservers/vcrux01/interfaces/mask
> ++ continue
> ++ _HAVE_INTERFACE_OPTIONS=1
> ++ test -n ''
> ++ _generateChbindOptions /etc/vservers/vcrux01
> ++ local vdir=/etc/vservers/vcrux01
> ++ local i
> ++ local bcast=
> ++ test -n 1
> ++ local f=/etc/vservers/vcrux01/interfaces/bcast
> ++ getFileValue bcast /etc/vservers/vcrux01/interfaces/bcast
> ++ local _gfv_var=bcast
> ++ local _gfv_file
> ++ shift
> ++ findFile _gfv_file /etc/vservers/vcrux01/interfaces/bcast ''
> ++ findObject -f _gfv_file /etc/vservers/vcrux01/interfaces/bcast ''
> ++ local _fo_mod=-f
> ++ local _fo_var=_gfv_file
> ++ local _fo_file=
> ++ local _fo_i=X
> ++ shift 2
> ++ for _fo_i in '"$@"'
> ++ test -n /etc/vservers/vcrux01/interfaces/bcast
> ++ test '!' -f /etc/vservers/vcrux01/interfaces/bcast
> ++ for _fo_i in '"$@"'
> ++ test -n ''
> ++ continue
> ++ test -z '' -o -n ''
> ++ eval '_gfv_file=""'
> +++ _gfv_file=
> ++ test -n '' -a -r ''
> ++ return 0
> ++ CHBIND_OPTS=($SILENT_OPT ${bcast:+--bcast "$bcast"})
> ++ for i in '"${INTERFACES[@]}"'
> ++ CHBIND_OPTS=("${CHBIND_OPTS[@]}" --ip "$i")
> ++ _HAVE_CHBIND_OPTIONS=1
> ++ _generateNiceCommand /etc/vservers/vcrux01
> ++ local vdir=/etc/vservers/vcrux01
> ++ local nice
> ++ test -r /etc/vservers/vcrux01/nice
> ++ return 0
> ++ _generateInitOptions /etc/vservers/vcrux01
> ++ local vdir=/etc/vservers/vcrux01
> ++ local cfgdir=/etc/vservers/vcrux01/apps/init
> ++ local i f
> ++ INITCMD_START=()
> ++ INITCMD_STOP=()
> ++ INITCMD_START_SYNC=()
> ++ INITCMD_STOP_SYNC=()
> ++ INITCMD_PREPARE=()
> ++ STOPCMD_PREPARE=()
> ++ INITKILL_SEQ=(15 5 9)
> ++ CHCONTEXT_INIT_OPTS=()
> ++ getFileValue INITSTYLE /etc/vservers/vcrux01/apps/init/style
> ++ local _gfv_var=INITSTYLE
> ++ local _gfv_file
> ++ shift
> ++ findFile _gfv_file /etc/vservers/vcrux01/apps/init/style ''
> ++ findObject -f _gfv_file /etc/vservers/vcrux01/apps/init/style ''
> ++ local _fo_mod=-f
> ++ local _fo_var=_gfv_file
> ++ local _fo_file=
> ++ local _fo_i=X
> ++ shift 2
> ++ for _fo_i in '"$@"'
> ++ test -n /etc/vservers/vcrux01/apps/init/style
> ++ test '!' -f /etc/vservers/vcrux01/apps/init/style
> ++ _fo_file=/etc/vservers/vcrux01/apps/init/style
> ++ break
> ++ test -z /etc/vservers/vcrux01/apps/init/style -o -n
/etc/vservers/vcrux01/apps/init/style
> ++ eval '_gfv_file="/etc/vservers/vcrux01/apps/init/style"'
> +++ _gfv_file=/etc/vservers/vcrux01/apps/init/style
> ++ test -n /etc/vservers/vcrux01/apps/init/style -a -r
/etc/vservers/vcrux01/apps/init/style
> ++ eval read INITSTYLE
> +++ read INITSTYLE
> ++ getFileValue RUNLEVEL_START
/etc/vservers/vcrux01/apps/init/runlevel
> ++ local _gfv_var=RUNLEVEL_START
> ++ local _gfv_file
> ++ shift
> ++ findFile _gfv_file /etc/vservers/vcrux01/apps/init/runlevel ''
> ++ findObject -f _gfv_file /etc/vservers/vcrux01/apps/init/runlevel ''
> ++ local _fo_mod=-f
> ++ local _fo_var=_gfv_file
> ++ local _fo_file=
> ++ local _fo_i=X
> ++ shift 2
> ++ for _fo_i in '"$@"'
> ++ test -n /etc/vservers/vcrux01/apps/init/runlevel
> ++ test '!' -f /etc/vservers/vcrux01/apps/init/runlevel
> ++ for _fo_i in '"$@"'
> ++ test -n ''
> ++ continue
> ++ test -z '' -o -n ''
> ++ eval '_gfv_file=""'
> +++ _gfv_file=
> ++ test -n '' -a -r ''
> ++ return 0
> ++ getFileValue RUNLEVEL_START
/etc/vservers/vcrux01/apps/init/runlevel.start
> ++ local _gfv_var=RUNLEVEL_START
> ++ local _gfv_file
> ++ shift
> ++ findFile _gfv_file /etc/vservers/vcrux01/apps/init/runlevel.start
''
> ++ findObject -f _gfv_file
/etc/vservers/vcrux01/apps/init/runlevel.start ''
> ++ local _fo_mod=-f
> ++ local _fo_var=_gfv_file
> ++ local _fo_file=
> ++ local _fo_i=X
> ++ shift 2
> ++ for _fo_i in '"$@"'
> ++ test -n /etc/vservers/vcrux01/apps/init/runlevel.start
> ++ test '!' -f /etc/vservers/vcrux01/apps/init/runlevel.start
> ++ for _fo_i in '"$@"'
> ++ test -n ''
> ++ continue
> ++ test -z '' -o -n ''
> ++ eval '_gfv_file=""'
> +++ _gfv_file=
> ++ test -n '' -a -r ''
> ++ return 0
> ++ getFileValue RUNLEVEL_STOP
/etc/vservers/vcrux01/apps/init/runlevel.stop
> ++ local _gfv_var=RUNLEVEL_STOP
> ++ local _gfv_file
> ++ shift
> ++ findFile _gfv_file /etc/vservers/vcrux01/apps/init/runlevel.stop ''
> ++ findObject -f _gfv_file
/etc/vservers/vcrux01/apps/init/runlevel.stop ''
> ++ local _fo_mod=-f
> ++ local _fo_var=_gfv_file
> ++ local _fo_file=
> ++ local _fo_i=X
> ++ shift 2
> ++ for _fo_i in '"$@"'
> ++ test -n /etc/vservers/vcrux01/apps/init/runlevel.stop
> ++ test '!' -f /etc/vservers/vcrux01/apps/init/runlevel.stop
> ++ for _fo_i in '"$@"'
> ++ test -n ''
> ++ continue
> ++ test -z '' -o -n ''
> ++ eval '_gfv_file=""'
> +++ _gfv_file=
> ++ test -n '' -a -r ''
> ++ return 0
> ++ getFileArray INITKILL_SEQ /etc/vservers/vcrux01/apps/init/killseq
> ++ test -r /etc/vservers/vcrux01/apps/init/killseq
> ++ return 1
> ++ :
> ++ case x"$INITSTYLE" in
> ++ INITCMD_START=(/sbin/init)
> ++ INITCMD_STOP=(/sbin/init)
> ++ _IS_FAKEINIT=1
> ++ _NEED_VSHELPER_SYNC=1
> ++ test -z ''
> ++ test -z ''
> ++ test xplain '!=' xrescue
> ++ getFileArray INITCMD_START
/etc/vservers/vcrux01/apps/init/cmd.start
> ++ test -r /etc/vservers/vcrux01/apps/init/cmd.start
> ++ return 1
> ++ :
> ++ getFileArray INITCMD_STOP /etc/vservers/vcrux01/apps/init/cmd.stop
> ++ test -r /etc/vservers/vcrux01/apps/init/cmd.stop
> ++ return 1
> ++ :
> ++ getFileArray INITCMD_START_SYNC
/etc/vservers/vcrux01/apps/init/cmd.start-sync
> ++ test -r /etc/vservers/vcrux01/apps/init/cmd.start-sync
> ++ return 1
> ++ :
> ++ getFileArray INITCMD_STOP_SYNC
/etc/vservers/vcrux01/apps/init/cmd.stop-sync
> ++ test -r /etc/vservers/vcrux01/apps/init/cmd.stop-sync
> ++ return 1
> ++ :
> ++ getFileArray INITCMD_PREPARE
/etc/vservers/vcrux01/apps/init/cmd.prepare
> ++ test -r /etc/vservers/vcrux01/apps/init/cmd.prepare
> ++ return 1
> ++ :
> ++ test -n '' -o -e /etc/vservers/vcrux01/apps/init/sync
> ++ INITCMD_START_SYNC=()
> ++ INITCMD_STOP_SYNC=()
> ++ _NEED_VSHELPER_SYNC=
> ++ vshelper.isEnabled
> ++ local f=disabled
> ++ test '!' -e /etc/vservers/.defaults/apps/vshelper/disabled
> ++ /usr/sbin/vserver-info - FEATURE vshelper
> ++ test -n ''
> ++ return 0
> ++ vshelper.getSyncTimeout /etc/vservers/vcrux01 VSHELPER_SYNC_TIMEOUT
> ++ local _vgst_appdir _vgst_file _vgst_tmp
> +++ /usr/sbin/vserver-info /etc/vservers/vcrux01 APPDIR vshelper
> ++ _vgst_appdir=
> ++ _vgst_appdir=
> ++ findFile _vgst_file
/etc/vservers/.defaults/apps/vshelper/sync-timeout ''
> ++ findObject -f _vgst_file
/etc/vservers/.defaults/apps/vshelper/sync-timeout ''
> ++ local _fo_mod=-f
> ++ local _fo_var=_vgst_file
> ++ local _fo_file=
> ++ local _fo_i=X
> ++ shift 2
> ++ for _fo_i in '"$@"'
> ++ test -n /etc/vservers/.defaults/apps/vshelper/sync-timeout
> ++ test '!' -f /etc/vservers/.defaults/apps/vshelper/sync-timeout
> ++ for _fo_i in '"$@"'
> ++ test -n ''
> ++ continue
> ++ test -z '' -o -n ''
> ++ eval '_vgst_file=""'
> +++ _vgst_file=
> ++ test -n ''
> ++ return 1
> ++ :
> ++ _generateChcontextOptions /etc/vservers/vcrux01
> ++ local vdir=/etc/vservers/vcrux01
> ++ local ctx hostname domainname
> ++ local cap_opts
> ++ local flag
> ++ test -z ''
> ++ _generateCapabilityOptions /etc/vservers/vcrux01
> ++ local vdir=/etc/vservers/vcrux01
> ++ local cap
> ++ _generateBCapabilityOptions /etc/vservers/vcrux01
> ++ local vdir=/etc/vservers/vcrux01
> ++ local cap
> ++ local f=/etc/vservers/vcrux01/bcapabilities
> ++ test -e /etc/vservers/vcrux01/bcapabilities
> ++ return 0
> ++ _generateCCapabilityOptions /etc/vservers/vcrux01
> ++ local vdir=/etc/vservers/vcrux01
> ++ local cap
> ++ local f=/etc/vservers/vcrux01/ccapabilities
> ++ test -e /etc/vservers/vcrux01/ccapabilities
> ++ return 0
> ++ test -e /etc/vservers/vcrux01/capabilities
> ++ return 0
> ++ _generateFlagOptions /etc/vservers/vcrux01
> ++ local vdir=/etc/vservers/vcrux01
> ++ CHCONTEXT_FLAG_OPTS=()
> ++ test '!' -e /etc/vservers/vcrux01/flags
> ++ isAvoidNamespace /etc/vservers/vcrux01
> ++ local cfgdir
> ++ /usr/sbin/vserver-info - FEATURE namespace
> +++ /usr/sbin/vserver-info /etc/vservers/vcrux01 CFGDIR
> ++ cfgdir=/etc/vservers/vcrux01
> ++ test '!' -e /etc/vservers/vcrux01/namespace
> ++ test -e /etc/vservers/.defaults/nonamespace -o -e
/etc/vservers/vcrux01/nonamespace
> ++ USE_VNAMESPACE=1
> ++ CHCONTEXT_FLAG_OPTS=("${CHCONTEXT_FLAG_OPTS[@]}" --flag namespace)
> ++ CHCONTEXT_OPTS=($SILENT_OPT "${CHCONTEXT_FLAG_OPTS[@]}"
"${CAP_OPTS[@]}" --secure ${ctx:+--ctx "$ctx"} ${hostname:+--hostname
"$hostname"} ${domainname:+--domainname "$domainname"})
> ++ OPTS_VCONTEXT_CREATE=($SILENT_OPT ${ctx:+--xid "$ctx"})
> ++ OPTS_VATTRIBUTE=(--secure --flag default "${OPTS_VATTRIBUTE[@]}")
> ++ _generateScheduleOptions /etc/vservers/vcrux01
> ++ local vdir=/etc/vservers/vcrux01
> ++ local f=/etc/vservers/vcrux01/schedule
> ++ test -e /etc/vservers/vcrux01/schedule
> ++ return 0
> ++ _generatePersonalityOptions /etc/vservers/vcrux01
> ++ local vdir=/etc/vservers/vcrux01
> ++ local f=/etc/vservers/vcrux01/personality
> ++ local type flags
> ++ test -s /etc/vservers/vcrux01/personality
> ++ return 0
> ++ test -n 1
> ++ CHCONTEXT_INIT_OPTS=(--disconnect --flag fakeinit)
> ++ OPTS_VCONTEXT_MIGRATE=("${OPTS_VCONTEXT_MIGRATE[@]}" --initpid
--disconnect)
> ++ pushd /etc/vservers/vcrux01
> ++ execScriptlets /etc/vservers/vcrux01 vcrux01 prepre-start
> ++ declare -r vdir=/etc/vservers/vcrux01
> ++ declare -r name=vcrux01
> ++ declare -r flavor=prepre-start
> ++ local base i
> ++ for base in '"$vdir"/scripts' '"$__CONFDIR"/.defaults/scripts'
> ++ local DONT_SKIP_DEFAULTS=
> ++ local already_handled=
> ++ for i in '"$base/$flavor"' '"$base/$flavor.d"/*'
> ++ isRegularFile /etc/vservers/vcrux01/scripts/prepre-start
> ++ test -f /etc/vservers/vcrux01/scripts/prepre-start
> ++ return 1
> ++ continue
> ++ for i in '"$base/$flavor"' '"$base/$flavor.d"/*'
> ++ isRegularFile '/etc/vservers/vcrux01/scripts/prepre-start.d/*'
> ++ test -f '/etc/vservers/vcrux01/scripts/prepre-start.d/*'
> ++ return 1
> ++ continue
> ++ test -z '' -o -n ''
> ++ for base in '"$vdir"/scripts' '"$__CONFDIR"/.defaults/scripts'
> ++ local DONT_SKIP_DEFAULTS=
> ++ local already_handled=
> ++ for i in '"$base/$flavor"' '"$base/$flavor.d"/*'
> ++ isRegularFile /etc/vservers/.defaults/scripts/prepre-start
> ++ test -f /etc/vservers/.defaults/scripts/prepre-start
> ++ return 1
> ++ continue
> ++ for i in '"$base/$flavor"' '"$base/$flavor.d"/*'
> ++ isRegularFile '/etc/vservers/.defaults/scripts/prepre-start.d/*'
> ++ test -f '/etc/vservers/.defaults/scripts/prepre-start.d/*'
> ++ return 1
> ++ continue
> ++ test -z '' -o -n ''
> ++ popd
> ++ enableInterfaces /etc/vservers/vcrux01
> ++ local i=0
> ++ declare -a var
> ++ lock /var/lock/vserver.interfaces
> +++ /usr/bin/mktemp /tmp/vserver-lock.XXXXXX
> ++ local tmp=/tmp/vserver-lock.gX2068
> ++ /bin/rm -f /tmp/vserver-lock.gX2068
> ++ /usr/bin/mkfifo -m600 /tmp/vserver-lock.gX2068
> ++ /usr/lib/util-vserver/lockfile /var/lock/vserver.interfaces
/tmp/vserver-lock.gX2068
> ++ /usr/bin/grep -q true /tmp/vserver-lock.gX2068
> ++ _VS_LOCKS='2071 2036 '
> ++ test 0 -lt 2
> ++ eval 'var=( "${INTERFACE_CMDS_0[@]}" )'
> +++ var=("${INTERFACE_CMDS_0[@]}")
> ++ local type=IP_ADDR
> ++ unset 'var[0]'
> ++ set -- 192.168.1.233/23 broadcast + label eth0:c01 dev eth0
> ++ case "$type" in
> ++ /usr/sbin/ip addr add 192.168.1.233/23 broadcast + label eth0:c01
dev eth0
> ++ let ++i
> ++ test 1 -lt 2
> ++ eval 'var=( "${INTERFACE_CMDS_1[@]}" )'
> +++ var=("${INTERFACE_CMDS_1[@]}")
> ++ local type=IP_LINK
> ++ unset 'var[0]'
> ++ set -- eth0 up
> ++ case "$type" in
> ++ /usr/sbin/ip link set eth0 up
> ++ let ++i
> ++ test 2 -lt 2
> ++ unlock 1
> ++ local num=1
> ++ local i
> ++ set -- 2071 2036
> ++ test 2 -gt 0
> ++ kill -HUP 2071
> ++ shift
> ++ test 1 '!=' 1
> ++ break
> ++ _VS_LOCKS=2036
> ++ have_interfaces=1
> ++ mountVserver /etc/vservers/vcrux01
> ++ local cfgdir=/etc/vservers/vcrux01
> ++ local ns_opt=
> ++ local vdir=/etc/vservers/vcrux01/vdir
> ++ local mtab_src
> ++ test -e /etc/vservers/vcrux01/fstab -o -e
/etc/vservers/vcrux01/fstab.local -o -e
/etc/vservers/vcrux01/fstab.remote
> ++ findObject -r mtab_src /etc/vservers/vcrux01/apps/init/mtab
/etc/vservers/.defaults/init/mtab /usr/lib/util-vserver/defaults/mtab
/dev/null
> ++ local _fo_mod=-r
> ++ local _fo_var=mtab_src
> ++ local _fo_file=
> ++ local _fo_i=X
> ++ shift 2
> ++ for _fo_i in '"$@"'
> ++ test -n /etc/vservers/vcrux01/apps/init/mtab
> ++ test '!' -r /etc/vservers/vcrux01/apps/init/mtab
> ++ for _fo_i in '"$@"'
> ++ test -n /etc/vservers/.defaults/init/mtab
> ++ test '!' -r /etc/vservers/.defaults/init/mtab
> ++ for _fo_i in '"$@"'
> ++ test -n /usr/lib/util-vserver/defaults/mtab
> ++ test '!' -r /usr/lib/util-vserver/defaults/mtab
> ++ _fo_file=/usr/lib/util-vserver/defaults/mtab
> ++ break
> ++ test -z /usr/lib/util-vserver/defaults/mtab -o -n
/usr/lib/util-vserver/defaults/mtab
> ++ eval 'mtab_src="/usr/lib/util-vserver/defaults/mtab"'
> +++ mtab_src=/usr/lib/util-vserver/defaults/mtab
> ++ pushd /etc/vservers/vcrux01/vdir
> ++ /usr/lib/util-vserver/chroot-sh truncate /etc/mtab
> ++ test -n 1
> ++ test -z ''
> ++ _mountVserverInternal /etc/vservers/vcrux01/fstab
> ++ local fstab=/etc/vservers/vcrux01/fstab
> ++ local xflag=
> ++ test -e /etc/vservers/vcrux01/fstab
> ++ shift
> ++ pushd /etc/vservers/vcrux01/vdir
> ++ test -w etc -o -w etc/mtab
> ++ /usr/lib/util-vserver/secure-mount -a --chroot --fstab
/etc/vservers/vcrux01/fstab --rootfs no
> ++ popd
> ++ _mountVserverInternal /etc/vservers/vcrux01/fstab.local
> ++ local fstab=/etc/vservers/vcrux01/fstab.local
> ++ local xflag=
> ++ test -e /etc/vservers/vcrux01/fstab.local
> ++ return 0
> ++ _mountVserverInternal /etc/vservers/vcrux01/fstab.remote
/usr/sbin/chbind --silent --ip 192.168.1.233/23
> ++ local fstab=/etc/vservers/vcrux01/fstab.remote
> ++ local xflag=
> ++ test -e /etc/vservers/vcrux01/fstab.remote
> ++ return 0
> ++ isAvoidNamespace /etc/vservers/vcrux01
> ++ local cfgdir
> ++ /usr/sbin/vserver-info - FEATURE namespace
> +++ /usr/sbin/vserver-info /etc/vservers/vcrux01 CFGDIR
> ++ cfgdir=/etc/vservers/vcrux01
> ++ test '!' -e /etc/vservers/vcrux01/namespace
> ++ test -e /etc/vservers/.defaults/nonamespace -o -e
/etc/vservers/vcrux01/nonamespace
> ++ /usr/lib/util-vserver/secure-mount --rbind -n
/etc/vservers/vcrux01/vdir /
> ++ is_mounted=1
> ++ prepareInit /etc/vservers/vcrux01
> ++ pushd /etc/vservers/vcrux01/vdir
> ++ case "$INITSTYLE" in
> ++ /usr/lib/util-vserver/chroot-sh rm .autofsck forcefsck
> ++ :
> ++ :
> ++ /usr/lib/util-vserver/chroot-sh truncate fastboot
> ++ pushd /etc/vservers/vcrux01/vdir/
> ++ execScriptlets /etc/vservers/vcrux01 vcrux01 pre-start
> ++ declare -r vdir=/etc/vservers/vcrux01
> ++ declare -r name=vcrux01
> ++ declare -r flavor=pre-start
> ++ local base i
> ++ for base in '"$vdir"/scripts' '"$__CONFDIR"/.defaults/scripts'
> ++ local DONT_SKIP_DEFAULTS=
> ++ local already_handled=
> ++ for i in '"$base/$flavor"' '"$base/$flavor.d"/*'
> ++ isRegularFile /etc/vservers/vcrux01/scripts/pre-start
> ++ test -f /etc/vservers/vcrux01/scripts/pre-start
> ++ return 1
> ++ continue
> ++ for i in '"$base/$flavor"' '"$base/$flavor.d"/*'
> ++ isRegularFile '/etc/vservers/vcrux01/scripts/pre-start.d/*'
> ++ test -f '/etc/vservers/vcrux01/scripts/pre-start.d/*'
> ++ return 1
> ++ continue
> ++ test -z '' -o -n ''
> ++ for base in '"$vdir"/scripts' '"$__CONFDIR"/.defaults/scripts'
> ++ local DONT_SKIP_DEFAULTS=
> ++ local already_handled=
> ++ for i in '"$base/$flavor"' '"$base/$flavor.d"/*'
> ++ isRegularFile /etc/vservers/.defaults/scripts/pre-start
> ++ test -f /etc/vservers/.defaults/scripts/pre-start
> ++ return 1
> ++ continue
> ++ for i in '"$base/$flavor"' '"$base/$flavor.d"/*'
> ++ isRegularFile '/etc/vservers/.defaults/scripts/pre-start.d/*'
> ++ test -f '/etc/vservers/.defaults/scripts/pre-start.d/*'
> ++ return 1
> ++ continue
> ++ test -z '' -o -n ''
> ++ popd
> ++ test -z ''
> ++ pushd /etc/vservers/vcrux01/vdir/
> ++ is_configured=1
> ++ /usr/sbin/vserver-info - FEATURE migrate
> ++ /usr/sbin/chbind --silent --ip 192.168.1.233/23 --
/usr/lib/util-vserver/exec-ulimit /etc/vservers/vcrux01/ulimits
/usr/sbin/vcontext --create --silent --xid 100 -- /usr/sbin/vnamespace
--set -- /usr/sbin/vlimit --dir /etc/vservers/vcrux01/rlimits
--missingok -- /usr/sbin/vsched --xid self -- /usr/sbin/vuname --xid
self --dir /etc/vservers/vcrux01/uts --missingok -- /usr/sbin/vuname
--xid self --set -t context=/etc/vservers/vcrux01 --
/usr/sbin/vattribute --set --secure --flag default --flag fakeinit --
/usr/lib/util-vserver/save_ctxinfo /etc/vservers/vcrux01 /usr/bin/env -i
-- /usr/sbin/vcontext --migrate-self --endsetup --chroot --silent
--initpid --disconnect -- /sbin/init
> save_ctxinfo: open("/usr/var/run/vservers/vcrux01"): No such file or
directory
                      ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

seems you did not make install-distribution, so some dirs
were not created properly ...

HTH,
Herbert

> + set +e
> + test -z ''
> + test -z ''
> + test -n 1 -a -z ''
> + warning '
> An error occured while executing the vserver startup sequence; when
> there are no other messages, it is very likely that the init-script
> (/sbin/init) failed.
>
> Common causes are:
> * /etc/rc.d/rc on Fedora Core 1 and RH9 fails always; the
'\''apt-rpm'\'' build
> method knows how to deal with this, but on existing installations,
> appending '\''true'\'' to this file will help.'
> + test -n ''
> + echo '
> An error occured while executing the vserver startup sequence; when
> there are no other messages, it is very likely that the init-script
> (/sbin/init) failed.
>
> Common causes are:
> * /etc/rc.d/rc on Fedora Core 1 and RH9 fails always; the
'\''apt-rpm'\'' build
> method knows how to deal with this, but on existing installations,
> appending '\''true'\'' to this file will help.'
>
> An error occured while executing the vserver startup sequence; when
> there are no other messages, it is very likely that the init-script
> (/sbin/init) failed.
>
> Common causes are:
> * /etc/rc.d/rc on Fedora Core 1 and RH9 fails always; the 'apt-rpm'
build
> method knows how to deal with this, but on existing installations,
> appending 'true' to this file will help.
> + test -n ''
> + warning '
>
> Failed to start vserver '\''vcrux01'\'''
> + test -n ''
> + echo '
>
> Failed to start vserver '\''vcrux01'\'''
>
>
> Failed to start vserver 'vcrux01'
> + test -n --debug
> + test -z 1
> + umountVserver /etc/vservers/vcrux01
> + local cfgdir=/etc/vservers/vcrux01
> + local vdir=/etc/vservers/vcrux01/vdir
> + local is_ok=1
> + isAvoidNamespace /etc/vservers/vcrux01
> + local cfgdir
> + /usr/sbin/vserver-info - FEATURE namespace
> ++ /usr/sbin/vserver-info /etc/vservers/vcrux01 CFGDIR
> + cfgdir=/etc/vservers/vcrux01
> + test '!' -e /etc/vservers/vcrux01/namespace
> + test -e /etc/vservers/.defaults/nonamespace -o -e
/etc/vservers/vcrux01/nonamespace
> + return 0
> + test -z 1
> + disableInterfaces /etc/vservers/vcrux01
> + test -n 1
> + local i=2
> + declare -a var
> + lock /var/lock/vserver.interfaces
> ++ /usr/bin/mktemp /tmp/vserver-lock.XXXXXX
> + local tmp=/tmp/vserver-lock.iZ2093
> + /bin/rm -f /tmp/vserver-lock.iZ2093
> + /usr/bin/mkfifo -m600 /tmp/vserver-lock.iZ2093
> + /usr/lib/util-vserver/lockfile /var/lock/vserver.interfaces
/tmp/vserver-lock.iZ2093
> + /usr/bin/grep -q true /tmp/vserver-lock.iZ2093
> + _VS_LOCKS='2096 2036'
> + test 2 -gt 0
> + let --i
> + eval 'var=( "${INTERFACE_CMDS_1[@]}" )'
> ++ var=("${INTERFACE_CMDS_1[@]}")
> + local type=IP_LINK
> + unset 'var[0]'
> + set -- eth0 up
> + case "$type" in
> + test 1 -gt 0
> + let --i
> + :
> + eval 'var=( "${INTERFACE_CMDS_0[@]}" )'
> ++ var=("${INTERFACE_CMDS_0[@]}")
> + local type=IP_ADDR
> + unset 'var[0]'
> + set -- 192.168.1.233/23 broadcast + label eth0:c01 dev eth0
> + case "$type" in
> + /usr/sbin/ip addr del 192.168.1.233/23 broadcast + label eth0:c01
dev eth0
> + test 0 -gt 0
> + unlock 1
> + local num=1
> + local i
> + set -- 2096 2036
> + test 2 -gt 0
> + kill -HUP 2096
> + shift
> + test 1 '!=' 1
> + break
> + _VS_LOCKS=2036
> + unlock
> + local num=
> + local i
> + set -- 2036
> + test 1 -gt 0
> + kill -HUP 2036
> + shift
> + test '' '!=' 1
> + test -z ''
> + test 0 -gt 0
> + _VS_LOCKS=
>
>
> Thanks Falk
> _______________________________________________
> Vserver mailing list
> Vserver@list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver
_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver

_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver
Received on Wed Apr 19 17:46:38 2006

[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Wed 19 Apr 2006 - 17:46:42 BST by hypermail 2.1.8