Re: [Vserver] routing question

From: Oliver Welter <mail_at_oliwel.de>
Date: Sat 22 Oct 2005 - 20:57:50 BST
Message-ID: <435A99BE.4040503@oliwel.de>

Hi Guenther,

> Now the prob: There should be set up _one_ host with also internal
> _and_ external IP (on eth0) which should externally use a different gw
> and also which should not change anything on the base setup. But if I
> activate _any_ external IP on eth0 the (previous) default route for
> eth1 is nomore used but guests (only having eth1 activated!) try to
> connect direct through this eth0 ip which they naturally can't use so
> traffic stops completely 8-(
>
> Any idea's/hint's?

You have to work around this with NATing and PREROUTING rules on the
host - if it is possible to not give an external IP to the host yo would
have easier live with NATing outside to a internal IP...

Oliver

-- 
Diese Nachricht wurde digital unterschrieben
oliwel's public key: http://www.oliwel.de/oliwel.crt
Basiszertifikat: http://www.ldv.ei.tum.de/page72

_______________________________________________
Vserver mailing list
Vserver@list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver

Received on Sat Oct 22 20:58:14 2005
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Sat 22 Oct 2005 - 20:58:17 BST by hypermail 2.1.8