From: patrick_at_pmenier.dynalias.net
Date: Fri 08 Jul 2005 - 20:36:53 BST
Hello
I've just tried now the util-vserver-0.25 and 0.28 and got i always got the
same error.
Then i've tried :
rescue:/usr/local/util-vserver-0.28# chcontext --ctx 49150 sleep 100 &
Can't set the new security context
: Invalid argument
[1] 11747
[1] Exit 255 chcontext --ctx 49150 sleep 100
Info :
rescue:/usr/local/util-vserver-0.29# cat /proc/version
Linux version 2.6.12.2-vs2.0-rc5 (root_at_rescue) (version gcc 3.3.5 (Debian
1:3.3.5-13)) #1 Thu Jul 7 15:17:26 CEST 2005
And eth0:vweb1 is always up ....; and /proc is mounted....
rescue:/usr/local/util-vserver-0.28# ifconfig | grep 192
inet adr:192.168.0.29 Bcast:192.168.0.255 Masque:255.255.255.0
inet adr:192.168.0.39 Bcast:192.168.0.255 Masque:255.255.255.0
rescue:/usr/local/util-vserver-0.28# ifconfig | grep eth0
eth0 Lien encap:Ethernet HWaddr 00:0C:29:8B:80:26
eth0:vweb Lien encap:Ethernet HWaddr 00:0C:29:8B:80:26
rescue:/usr/local/util-vserver-0.28# df -hTa |grep '/proc'
proc proc 0 0 0 - /proc
none proc 0 0 0 - /opt/vservers/vweb1/proc
It's a fool story no ? :-))
Patrick
----- Original Message -----
From: "Herbert Poetzl" <herbert_at_13thfloor.at>
To: "Patrick Home" <patrick_at_pmenier.dynalias.net>
Cc: <vserver_at_list.linux-vserver.org>
Sent: Thursday, July 07, 2005 8:20 PM
Subject: Re: [Vserver] Can't set the ipv4 root (Invalid argument)
> On Thu, Jul 07, 2005 at 09:15:39AM +0200, Patrick Home wrote:
> >
> > Hello
> >
> > I'm running a debian Linux version 2.6.12.2-vs2.0-rc5. I've compiled
> > util-vserver 0.30 from linux-vserver.org but i got the following error
when
> > i when to start a vserver :
> >
> > Can't set the ipv4 root (Invalid argument)
> >
> > I didn't have this problem with previous version from kernel 2.4.25 to
> > kernel 2.6.11.11
>
> yes, this was a breakage in compatibility because we bumped
> up the version and older (ancient) tools do not handle that
> well, but it will be fixed in 2.0, with an additional config
> option (which of course is depreciated) ...
>
> it seems that this restores compatibility quite fine ...
>
> (util-vserver-0.25)
> Linux-VServer Test [V0.13] Copyright (C) 2003-2005 H.Poetzl
> chcontext is working.
> chbind is working.
> Linux 2.6.12.2-vs2.0-rc5 i686/0.25/0.25 [E] (0)
> VCI: 0002:0001 273 031100f6
> ---
> [000]# succeeded.
> [001]# succeeded.
> [011]# succeeded.
> [031]# succeeded.
> [101]# succeeded.
> [102]# succeeded.
> [201]# succeeded.
> [202]# succeeded.
>
> (vserver-0.28)
> Linux-VServer Test [V0.13] Copyright (C) 2003-2005 H.Poetzl
> chcontext is working.
> chbind is working.
> Linux 2.6.12.2-vs2.0-rc5 i686/0.28/0.28 [J] (0)
> VCI: 0002:0001 273 031100f6
> ---
> [000]# succeeded.
> [001]# succeeded.
> [011]# succeeded.
> [031]# succeeded.
> [101]# succeeded.
> [102]# succeeded.
> [201]# succeeded.
> [202]# succeeded.
>
> of course, updating to newer tools is advised ...
>
> HTH,
> Herbert
>
> > I didn't want to use debian package as it's in conflict with
vpopmail-bin
> > (cf vkill program in /usr/sbin)
> >
> > The most strange is that iface of vserver is up and /proc is mounted
after i
> > type vserver vweb1 start :
> >
> > srvweb:~/admintools/dev# ifconfig
> > eth0 Link encap:Ethernet HWaddr 00:11:09:93:DD:FB
> > inet addr:192.168.0.23 Bcast:192.168.0.255
Mask:255.255.255.0
> > inet6 addr: fe80::211:9ff:fe93:ddfb/64 Scope:Link
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > RX packets:52791 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:50594 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:1000
> > RX bytes:13278044 (12.6 MiB) TX bytes:25745227 (24.5 MiB)
> > Interrupt:23 Base address:0xb800
> >
> >
> > eth0:vweb Link encap:Ethernet HWaddr 00:11:09:93:DD:FB
> > inet addr:192.168.0.230 Bcast:192.168.0.255
Mask:255.255.255.0
> > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> > Interrupt:23 Base address:0xb800
> >
> > lo Link encap:Local Loopback
> > inet addr:127.0.0.1 Mask:255.0.0.0
> > inet6 addr: ::1/128 Scope:Host
> > UP LOOPBACK RUNNING MTU:16436 Metric:1
> > RX packets:44407 errors:0 dropped:0 overruns:0 frame:0
> > TX packets:44407 errors:0 dropped:0 overruns:0 carrier:0
> > collisions:0 txqueuelen:0
> > RX bytes:12361041 (11.7 MiB) TX bytes:12361041 (11.7 MiB)
> >
> >
> > srvweb:/usr/src/linux-2.6.12.2# df -hTa
> > Filesystem Type Size Used Avail Use% Mounted on
> > /dev/hda1 ext3 9.2G 1.5G 7.3G 17% /
> > proc proc 0 0 0 - /proc
> > sysfs sysfs 0 0 0 - /sys
> > devpts devpts 0 0 0 - /dev/pts
> > tmpfs tmpfs 16M 12K 16M 1% /dev/shm
> > usbfs usbfs 0 0 0 - /proc/bus/usb
> > tmpfs tmpfs 64M 2.4M 62M 4% /tmp
> > /dev/hda3 ext3 9.2G 531M 8.2G 6% /var
> > /dev/md0 ext3 4.6G 533M 3.9G 12% /usr/local
> > /dev/md1 ext3 9.2G 483M 8.3G 6% /web/clients
> > /dev/md2 ext3 9.2G 137M 8.6G 2% /home
> > /dev/md3 ext3 9.2G 3.2G 5.6G 37% /opt
> > /dev/hda9 ext3 23G 33M 22G 1% /wrk
> > /dev/hdc1 ext3 9.2G 1.5G 7.3G 17% /spare/racine
> > /dev/hdc3 ext3 9.2G 538M 8.2G 7% /spare/var
> > /dev/hdc9 ext3 23G 899M 21G 5% /spare/wrk
> > none binfmt_misc 0 0 0 - /proc/sys/fs/binfmt_misc
> > none proc 0 0 0 - /opt/vservers/vweb1/proc
> > none devpts 0 0 0 - /opt/vservers/vweb1/dev/pts
> >
> >
> >
> > My kernel is ok (i think) :
> >
> > srvweb:/usr/src/linux-2.6.12.2# grep -i legacy .config
> > CONFIG_PCI_LEGACY_PROC=y
> > # CONFIG_MEGARAID_LEGACY is not set
> > CONFIG_LEGACY_PTYS=y
> > CONFIG_LEGACY_PTY_COUNT=256
> > CONFIG_VSERVER_LEGACYNET=y
> > CONFIG_VSERVER_LEGACY=y
> >
> > I did'nt activate proc/security as i just want to test ....
> >
> > Could anybody help me ?
> >
> > Thanks
> > Patrick
> >
> >
> > _______________________________________________
> > Vserver mailing list
> > Vserver_at_list.linux-vserver.org
> > http://list.linux-vserver.org/mailman/listinfo/vserver
>
>
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver