About this list Date view Thread view Subject view Author view Attachment view

From: Herbert Poetzl (herbert_at_13thfloor.at)
Date: Wed 27 Oct 2004 - 14:30:00 BST


On Tue, Oct 26, 2004 at 11:26:25PM -0400, Tad Truex wrote:
>
> Greetings,
>
> I have built a 2.6.8.1 kernel with the 1.9.2 verser patch cleanly
> applied and (I believe) correctly configured.
>
> I have built what I believe is a functional relatively minimal FC2 root
> directory. I used the install-fc1 script from util-vserver version 0.30
> as a basis for my install.
>
> I have set IPROOT to eth1:192.168.1.30 in my config . (eth1 is the
> device on the 192.168.1.0/24 subnet)
>
> When I try to start the vserver I get the following.
>
> [root_at_bertha util-vserver]# vserver fc2 start
> Starting the virtual server fc2
> Server fc2 is not running
> Can't set the ipv4 root (Function not implemented)

that doesn't sound like a working vserver kernel,
let's give the testme.sh script a run please, and
let us know what it prints ...

http://vserver.13thfloor.at/Stuff/testme.sh

HTH,
Herbert

> Any one have a thought about where I should look for the source of the
> problem? (I checked google and the util-vserver source, but didn't turn
> anything up...)
>
>
>
> Thanks in advance,
> Tad
>
>
> _______________________________________________
> Vserver mailing list
> Vserver_at_list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver


About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Wed 27 Oct 2004 - 14:30:15 BST by hypermail 2.1.3