From: Herbert Poetzl (herbert_at_13thfloor.at)
Date: Mon 18 Oct 2004 - 12:55:23 BST
On Sun, Oct 17, 2004 at 11:25:11PM -0400, Stephen Frost wrote:
> Greetings,
>
> Getting repeated crashes (off and on) when using 2.6.8.1 and vserver
> 1.9.2 (util-vserver 0.30.190). Machine is located remotely, first
> time an oops was logged. Appears to be in log_do_checkpoint under
> ext3.
> Possibly vserver-related, seems to happen shortly after
> IO-intensive vserver is started (though not always, lasted a few days
> between the last two crashes).
have seen that too, once in a while, but there where
some changes in 2.6.9, so maybe trying 2.6.9-rc4
(or soon final) with vs1.9.3-rc3 (not much changed
here, see delta for details) would be a good check
http://vserver.13thfloor.at/Experimental/
the trace shows signs from posix locking and ext3
journalling, as well as all kinds of inode ops
so if it doesn't happen again, it's most likely an
issue with 2.6.8.1 ...
> If any other information would be useful, please don't hesitate to ask.
yeah, this first line of the oops seems missing
(would expect something like: pagefault, bug at
or kernel NULL pointer dereference)
the rest of the report is exceptionally well done
please try to disassemble (with objdump) the kernel
function log_do_checkpoint() around the location
of the oops
v
> Code: 0f 0b 69 01 f7 01 33 c0 eb b8 8d 44 24 1c 8d 54 24 24 89 44
TIA,
Herbert
> Version:
> Linux version 2.6.8.1-vs1.9.2kenobi.3 (sfrost_at_kenobi) (gcc version 3.3.4
> (Debian 1:3.3.4-13)) #1 SMP Thu Sep 30 15:28:02 EDT 2004
>
> Oops:
> ------------[ cut here ]------------
> SMP
> Modules linked in: ipt_REDIRECT ipt_REJECT iptable_nat iptable_mangle iptable_filter ipt_state ipt_pkttype ipt_physdev ipt_multiport ipt_conntrack ipt_MARK ipt_LOG ip_conntrack ip_tables 8250 serial_core snd_intel8x0 s
> nd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd soundcore ehci_hcd uhci_hcd usbcore intel_agp agpgart eeprom lm85 i2c_sensor i2c_i801 i2c_dev i2c_core pcspkr
> CPU: 1
> EIP: 0060:[log_do_checkpoint+364/459] Not tainted
> EFLAGS: 00010286 (2.6.8.1-vs1.9.2kenobi.3)
> EIP is at log_do_checkpoint+0x16c/0x1cb
> eax: 0000006e ebx: 00000000 ecx: c036ad04 edx: c036ad04
> esi: 00000000 edi: 00000001 ebp: c932d83c esp: e3a9fd0c
> ds: 007b es: 007b ss: 0068
> Process sendmail (pid: 9628, threadinfo=e3a9e000 task=e10c3770)
> Stack: c03323c0 c031be9d c03301f7 00000169 c0335200 00294867 c1a87180 00000000
> 00000000 e498574c c0476120 00000000 00000003 c180c0a0 c180cd60 c015a341
> dedcbf5c dedcbf5c dedcbf5c f314ae3c dedcbf5c c01a60ac f700f4e0 f314ae3c
> Call Trace:
> [wake_up_buffer+23/83] wake_up_buffer+0x17/0x53
> [do_get_write_access+645/1583] do_get_write_access+0x285/0x62f
> [wake_up_buffer+23/83] wake_up_buffer+0x17/0x53
> [find_busiest_group+234/806] find_busiest_group+0xea/0x326
> [ext3_do_update_inode+517/1094] ext3_do_update_inode+0x205/0x446
> [radix_tree_delete+325/398] radix_tree_delete+0x145/0x18e
> [__log_wait_for_space+199/218] __log_wait_for_space+0xc7/0xda
> [start_this_handle+290/954] start_this_handle+0x122/0x3ba
> [find_get_pages+55/90] find_get_pages+0x37/0x5a
> [pagevec_lookup+46/56] pagevec_lookup+0x2e/0x38
> [truncate_inode_pages+289/696] truncate_inode_pages+0x121/0x2b8
> [journal_start+171/210] journal_start+0xab/0xd2
> [locks_delete_lock+139/221] locks_delete_lock+0x8b/0xdd
> [start_transaction+35/88] start_transaction+0x23/0x58
> [locks_remove_posix+239/268] locks_remove_posix+0xef/0x10c
> [ext3_delete_inode+0/230] ext3_delete_inode+0x0/0xe6
> [ext3_delete_inode+39/230] ext3_delete_inode+0x27/0xe6
> [ext3_delete_inode+0/230] ext3_delete_inode+0x0/0xe6
> [generic_delete_inode+147/316] generic_delete_inode+0x93/0x13c
> [iput+98/124] iput+0x62/0x7c
> [dput+231/403] dput+0xe7/0x193
> [__fput+179/260] __fput+0xb3/0x104
> [filp_close+89/134] filp_close+0x59/0x86
> [sys_close+94/113] sys_close+0x5e/0x71
> [syscall_call+7/11] syscall_call+0x7/0xb
> Code: 0f 0b 69 01 f7 01 33 c0 eb b8 8d 44 24 1c 8d 54 24 24 89 44
>
> ---------------------------------------------
>
> sfrost_at_kenobi:/home/sfrost/linux/linux-2.6.8.1> sh scripts/ver_linux
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux kenobi 2.6.8.1-vs1.9.2kenobi.3 #1 SMP Thu Sep 30 15:28:02 EDT 2004 i686 GNU/Linux
>
> Gnu C 3.3.4
> Gnu make 3.80
> binutils 2.15
> util-linux 2.12
> mount 2.12
> module-init-tools 3.1-pre5
> e2fsprogs 1.35
> Linux C Library 2.3.2
> Dynamic linker (ldd) 2.3.2
> Procps 3.2.3
> Net-tools 1.60
> Console-tools 0.2.3
> Sh-utils 5.2.1
> Modules Loaded iptable_nat iptable_mangle iptable_filter ipt_state ipt_pkttype ipt_physdev ipt_multiport ipt_conntrack ipt_MARK ipt_LOG ip_conntrack ip_tables 8250 serial_core snd_intel8x0 snd_ac97_codec snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device snd
> soundcore ehci_hcd uhci_hcd usbcore intel_agp agpgart eeprom lm85 i2c_sensor i2c_i801 i2c_dev i2c_core pcspkr
>
> ---------------------------------------------
> sfrost_at_kenobi:/home/sfrost/linux/linux-2.6.8.1> cat /proc/cpuinfo
> processor : 0
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
> stepping : 9
> cpu MHz : 2794.047
> cache size : 512 KB
> physical id : 0
> siblings : 2
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
> bogomips : 5521.40
>
> processor : 1
> vendor_id : GenuineIntel
> cpu family : 15
> model : 2
> model name : Intel(R) Pentium(R) 4 CPU 2.80GHz
> stepping : 9
> cpu MHz : 2794.047
> cache size : 512 KB
> physical id : 0
> siblings : 2
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 2
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid
> bogomips : 5570.56
>
> ---------------------------------------------
> sfrost_at_kenobi:/home/sfrost/linux/linux-2.6.8.1> cat /proc/modules
> iptable_nat 21356 - - Live 0xf8964000
> iptable_mangle 2088 - - Live 0xf892b000
> iptable_filter 2120 - - Live 0xf8830000
> ipt_state 1512 - - Live 0xf8926000
> ipt_pkttype 1352 - - Live 0xf88e7000
> ipt_physdev 1752 - - Live 0xf88e5000
> ipt_multiport 1640 - - Live 0xf88c6000
> ipt_conntrack 1992 - - Live 0xf88c4000
> ipt_MARK 1672 - - Live 0xf8893000
> ipt_LOG 5704 - - Live 0xf88c8000
> ip_conntrack 29388 - - Live 0xf8931000
> ip_tables 14336 - - Live 0xf88f2000
> 8250 28032 - - Live 0xf891e000
> serial_core 19240 - - Live 0xf88df000
> snd_intel8x0 28808 - - Live 0xf88e9000
> snd_ac97_codec 63596 - - Live 0xf890d000
> snd_pcm 80708 - - Live 0xf88f8000
> snd_timer 20492 - - Live 0xf88cc000
> snd_page_alloc 8784 - - Live 0xf8844000
> snd_mpu401_uart 5896 - - Live 0xf888e000
> snd_rawmidi 19524 - - Live 0xf88a4000
> snd_seq_device 6320 - - Live 0xf888b000
> snd 42756 - - Live 0xf88d3000
> soundcore 6848 - - Live 0xf8857000
> ehci_hcd 24524 - - Live 0xf889d000
> uhci_hcd 28376 - - Live 0xf8895000
> usbcore 100420 - - Live 0xf88aa000
> intel_agp 18952 - - Live 0xf8864000
> agpgart 27596 - - Live 0xf885c000
> eeprom 6096 - - Live 0xf8848000
> lm85 19884 - - Live 0xf884c000
> i2c_sensor 2344 - - Live 0xf8834000
> i2c_i801 6936 - - Live 0xf8841000
> i2c_dev 7552 - - Live 0xf8838000
> i2c_core 18184 - - Live 0xf883b000
> pcspkr 3116 - - Live 0xf8832000
>
> ---------------------------------------------
> sfrost_at_kenobi:/home/sfrost/linux/linux-2.6.8.1> cat /proc/ioports
> 0000-001f : dma1
> 0020-0021 : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-0077 : rtc
> 0080-008f : dma page reg
> 00a0-00a1 : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 02f8-02ff : serial
> 0376-0376 : ide1
> 03c0-03df : vga+
> 03f6-03f6 : ide0
> 03f8-03ff : serial
> 0800-087f : 0000:00:1f.0
> 0880-08bf : 0000:00:1f.0
> 0cf8-0cff : PCI conf1
> ddc0-ddff : 0000:02:0c.0
> ddc0-ddff : e1000
> de00-deff : 0000:02:00.0
> eda0-edbf : 0000:00:1f.3
> eda0-edaf : i801-smbus
> edc0-edff : 0000:00:1f.5
> ee00-eeff : 0000:00:1f.5
> fe00-fe07 : 0000:00:1f.2
> fe00-fe07 : libata
> fe10-fe13 : 0000:00:1f.2
> fe10-fe13 : libata
> fe20-fe27 : 0000:00:1f.2
> fe20-fe27 : libata
> fe30-fe33 : 0000:00:1f.2
> fe30-fe33 : libata
> fea0-feaf : 0000:00:1f.2
> fea0-feaf : libata
> ff20-ff3f : 0000:00:1d.3
> ff20-ff3f : uhci_hcd
> ff40-ff5f : 0000:00:1d.2
> ff40-ff5f : uhci_hcd
> ff60-ff7f : 0000:00:1d.1
> ff60-ff7f : uhci_hcd
> ff80-ff9f : 0000:00:1d.0
> ff80-ff9f : uhci_hcd
> ffa0-ffaf : 0000:00:1f.1
> ffa0-ffa7 : ide0
> ffa8-ffaf : ide1
>
> ---------------------------------------------
> sfrost_at_kenobi:/home/sfrost/linux/linux-2.6.8.1> cat /proc/iomem
> 00000000-0009ffff : System RAM
> 000a0000-000bffff : Video RAM area
> 000c0000-000c7fff : Video ROM
> 000c9800-000cbfff : Adapter ROM
> 000f0000-000fffff : System ROM
> 00100000-3ff73fff : System RAM
> 00100000-00317026 : Kernel code
> 00317027-00442eff : Kernel data
> 3ff74000-3ff75fff : ACPI Non-volatile Storage
> 3ff76000-3ff96fff : ACPI Tables
> 3ff97000-3fffffff : reserved
> f0000000-f7ffffff : 0000:00:00.0
> fd000000-fdffffff : 0000:02:00.0
> fe9df000-fe9dffff : 0000:02:00.0
> fe9e0000-fe9fffff : 0000:02:0c.0
> fe9e0000-fe9fffff : e1000
> febff900-febff9ff : 0000:00:1f.5
> febff900-febff9ff : Intel ICH5 - Controller
> febffa00-febffbff : 0000:00:1f.5
> febffa00-febffbff : Intel ICH5 - AC'97
> febffc00-febfffff : 0000:00:1f.1
> fec00000-fec0ffff : reserved
> fecf0000-fecf0fff : reserved
> fed20000-fed8ffff : reserved
> fee00000-fee0ffff : reserved
> ffa80800-ffa80bff : 0000:00:1d.7
> ffa80800-ffa80bff : ehci_hcd
> ffb00000-ffffffff : reserved
>
> ---------------------------------------------
> ===# lspci -vvv
> 0000:00:00.0 Host bridge: Intel Corp. 82875P Memory Controller Hub (rev 02)
> Subsystem: Dell: Unknown device 0162
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 0
> Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
> Capabilities: [e4] #09 [2106]
> Capabilities: [a0] AGP version 3.0
> Status: RQ=32 Iso- ArqSz=2 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
>
> 0000:00:01.0 PCI bridge: Intel Corp. 82875P Processor to AGP Controller (rev 02) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
> I/O behind bridge: 0000f000-00000fff
> Memory behind bridge: fff00000-000fffff
> Prefetchable memory behind bridge: fff00000-000fffff
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>
> 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Dell: Unknown device 0162
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 161
> Region 4: I/O ports at ff80 [size=32]
>
> 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Dell: Unknown device 0162
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 185
> Region 4: I/O ports at ff60 [size=32]
> 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Dell: Unknown device 0162
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin C routed to IRQ 177
> Region 4: I/O ports at ff40 [size=32]
>
> 0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
> Subsystem: Dell: Unknown device 0162
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 161
> Region 4: I/O ports at ff20 [size=32]
>
> 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
> Subsystem: Dell: Unknown device 0162
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin D routed to IRQ 217
> Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [58] #0a [20a0]
>
> 0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fd000000-feafffff
> Prefetchable memory behind bridge: fff00000-000fffff
> BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
>
> 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
> Subsystem: Dell: Unknown device 0162
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 177
> Region 0: I/O ports at <ignored>
> Region 1: I/O ports at <ignored>
> Region 2: I/O ports at <ignored>
> Region 3: I/O ports at <ignored>
> Region 4: I/O ports at ffa0 [size=16]
> Region 5: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
>
> 0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: Dell: Unknown device 0162
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin A routed to IRQ 177
> Region 0: I/O ports at fe00 [size=8]
> Region 1: I/O ports at fe10 [size=4]
> Region 2: I/O ports at fe20 [size=8]
> Region 3: I/O ports at fe30 [size=4]
> Region 4: I/O ports at fea0 [size=16]
>
> 0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
> Subsystem: Dell: Unknown device 0162
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Interrupt: pin B routed to IRQ 169
> Region 4: I/O ports at eda0 [size=32]
>
> 0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
> Subsystem: Dell: Unknown device 0162
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
> Interrupt: pin B routed to IRQ 169
> Region 0: I/O ports at ee00 [size=256]
> Region 1: I/O ports at edc0 [size=64]
> Region 2: Memory at febffa00 (32-bit, non-prefetchable) [size=512]
> Region 3: Memory at febff900 (32-bit, non-prefetchable) [size=256]
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:02:00.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
> Subsystem: ATI Technologies Inc Rage XL
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (2000ns min), Cache Line Size: 0x10 (64 bytes)
> Interrupt: pin A routed to IRQ 201
> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: I/O ports at de00 [size=256]
> Region 2: Memory at fe9df000 (32-bit, non-prefetchable) [size=4K]
> Expansion ROM at fea00000 [disabled] [size=128K]
> Capabilities: [5c] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 0000:02:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)
> Subsystem: Dell: Unknown device 0156
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (63750ns min), Cache Line Size: 0x10 (64 bytes)
> Interrupt: pin A routed to IRQ 177
> Region 0: Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K]
> Region 2: I/O ports at ddc0 [size=64]
> Capabilities: [dc] Power Management version 2
> Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [e4] PCI-X non-bridge device.
> Command: DPERE- ERO+ RBC=0 OST=0
> Status: Bus=0 Dev=0 Func=0 64bit- 133MHz- SCD- USC-, DC=simple, DMMRBC=2, DMOST=0, DMCRS=1, RSCEM-
> Capabilities: [f0] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
> Address: 0000000000000000 Data: 0000
>
> ---------------------------------------------
>
> Thanks,
>
> Stephen
> _______________________________________________
> Vserver mailing list
> Vserver_at_list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver