From: Herbert Poetzl (herbert_at_13thfloor.at)
Date: Wed 18 Feb 2004 - 07:54:39 GMT
okay, maybe I can clarify that a little for both of you ...
here some facts:
- quota (per vserver) and disk limits (for each vserver)
on a 'shared' partition require the quota patch (q0.13)
- quota (per vserver) with a separate partition for each
vserver do not require the quota patch
- if you use the quota patch, the quota system is modified
that way, that it supports more than one quota hash per
partition (to allow more than one vserver with different
quota entries), which requires the user to add those
hashes before they can be used (with dqhadd from the
quota tools)
On Tue, Feb 17, 2004 at 09:05:49PM -0500, Jean-Christophe Petit wrote:
> Thanks a lot for your answer.
> But if I removed the "Per Context Quota/Disk Limits Addon" patch, does the
> quota will work inside eache virtual server ?
yes, it will work with and without the quota patches, you
just need to do the required things (dqhadd, vrsetup, dqhadd)
but you won't be able to have more than one vserver per disk
partition using quota (in the one lvm partition per vserver
this isn't the case, so yes, it will work there)
> thanks again,
> JC
>
> At 07:33 PM 2/17/2004, Fritz Kron wrote:
> >Hello,
> >
> >Had just a similar problem, removing the "Per Context Quota/Disk Limits
> >Addon" patch from kernel, which you will not need for secure quotas on
> >separate partition, fixed this problem for me.
probably you also 'forgot' to add the quota hashes to the
kernel (which is done with the quota tools), Bill is
currently working with the quota stuff (testing and figuring
out how the details work) and will add a 'new' howto soon
for the time being, the following links might be useful:
http://vserver.13thfloor.at/Linux2.6/index.php?page=Per+Context+Quota
http://vserver.13thfloor.at/Linux2.6/index.php?page=Per+Context+Disk+Limits
> >... Fritz
> >
> >On Tue, 17 Feb 2004 12:56:16 -0500
> >Jean-Christophe Petit <jcpetit_at_syspark.com> wrote:
> >
> >> Hello,
> >>
> >> I have a installed and configured secure quota with LVM and the quota
> >> support does not work.
> >> I followed: http://www.13thfloor.at/old/VServer/HowTo_LVMQS.shtml
> >> and http://list.linux-vserver.org/archive/vserver/msg05969.html
> >>
> >> when ext3 or ufs is used (in the vserver1) I have the following errors:
> >> Turning on quota. quotaon: using //aquota.group on /dev/hdv1 [/]: No
> >> such device or address
> >> quotaon: using //aquota.user on /dev/hdv1 [/]: No such device or address
the following explanations come to mind:
- /dev/hdv1 is no block or vroot device
- /dev/hdv1 is a vroot device, but it isn't set up
properly
- the quota hashes for this particular context
are not added (according to your startup scripts
this is the case here)
HTH,
Herbert
> >> SETUP:
> >> [ Redhat Enterprise 2.1 ]
> >> kernel 2.4.24
> >> patch-2.4.24-vs1.26.diff
> >> patch-2.4.24-vs1.26-q0.13.diff (I also tried with 0.12)
> >>
> >> util-vserver-0.28-1mdk
> >> quota-3.09-1.21
> >> vr-tools-0.14
> >>
> >> kernel config:
> >> 'Virtual root device' enabled in 'Block devices --->'
> >> 'Quota support' enabled in 'File systems --->'
> >> 'VFS v0 quota format support' enabled in 'File systems --->'
> >> 'Persistend Context ID for files' at '(UID32/GID32)'
> >>
> >> /dev/vservers is the LVM volume group
> >> /dev/vservers/vs1lv LVM separate partition for the virtual vserver1
> >> /dev/vroot/0 is the virtual root device used
> >>
> >> the mtab of the vserver1 :
> >> /dev/hdv1 / ufs rw,usrquota,grpquota 0 0
> >>
> >> Make node with name for vserver: mknod /dev/vroot/0 b 4 0
> >>
> >> ----------------- /etc/vservers/vserver1.sh -----------------
> >> #!/bin/sh
> >> case $1 in
> >> pre-start)
> >> e2fsck -p /dev/vservers/vs1lv
> >> mount -o rw,usrquota,grpquota /dev/vservers/vs1lv
> >/vservers/vserver1
> >> rm -f /vservers/vserver1/dev/hdv1
> >> vrsetup /dev/vroot/0 /dev/vservers/vs1lv
> >> cp -fa /dev/vroot/0 /vservers/vserver1/dev/hdv1
> >> ;;
> >> post-start)
> >> ;;
> >> pre-stop)
> >> ;;
> >> post-stop)
> >> mount -o remount,ro /vservers/vserver1
> >> umount /vservers/vserver1
> >> vrsetup -d /dev/vroot/0
> >> ;;
> >> *)
> >> echo $0 pre-start
> >> echo $0 pre-stop
> >> echo $0 post-start
> >> echo $0 post-stop
> >> ;;
> >> esac
> >> ----------------- /etc/vservers/vserver1.sh -----------------
> >>
> >> dans /etc/vservers/vserver1.conf:
> >> S_FLAGS="lock nproc"
> >> S_CAPS="CAP_NET_RAW CAP_QUOTACTL"
> >>
> >>
> >> many thanks for your help,
> >>
> >> --
> >> Jean-Christophe Petit
> >> Syspark inc.
> >>
> >_______________________________________________
> >Vserver mailing list
> >Vserver_at_list.linux-vserver.org
> >http://list.linux-vserver.org/mailman/listinfo/vserver
>
>
> _______________________________________________
> Vserver mailing list
> Vserver_at_list.linux-vserver.org
> http://list.linux-vserver.org/mailman/listinfo/vserver
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver