From: Charles Dale (bug_at_aphid.net)
Date: Tue 25 Nov 2003 - 14:26:19 GMT
Hi Tyrone!
Assuming CAP_SYS_RESOURCE got added properly to the vserver, you must have
some other error than the standard one. Check the logs and let us know what
bind thinks is the problem - can't help without specific failure & logging
info.
Cheers,
Chuck
> -----Original Message-----
> From: vserver-admin_at_list.linux-vserver.org
> [mailto:vserver-admin_at_list.linux-vserver.org] On Behalf Of
> mile1_at_bellsouth.net
> Sent: Wednesday, 26 November 2003 1:07 AM
> To: vserver_at_list.linux-vserver.org
> Subject: RE: RE: [Vserver] Rpms for vserver 0.27 (got it)
>
>
> Hello Chuck,
>
> Is there some way to get bind9 to work in the vserver. I've
> tried CAP_SYS_RESOURCE, and this didn't work. I'm not sure I
> did the recompile on the bind source. Is there any
> instructions on how to do this inside the vserver?
>
> Thanks
> TyroneM.
> >
> > From: "Charles Dale" <bug_at_aphid.net>
> > Date: 2003/11/23 Sun PM 11:27:03 EST
> > To: <vserver_at_list.linux-vserver.org>
> > Subject: RE: RE: [Vserver] Rpms for vserver 0.27 (got it)
> >
> > Hmm can someone else answer this one please, I've lost
> track of what
> > happened to the Per Context Quota & Disk Limit patches after 1.0.
> > Herbert did they get merged into the main patch?
> >
> > Some of the memory & process limits are controlled by
> ulimit settings
> > - see the ULIMIT= variable in your <vserver>.conf.
> >
> > I've yet to investigate doing complete limiting so I can't give you
> > much more specific info.
> >
> > Cheers,
> > Chuck
> >
> > > -----Original Message-----
> > > From: vserver-admin_at_list.linux-vserver.org
> > > [mailto:vserver-admin_at_list.linux-vserver.org] On Behalf Of
> > > mile1_at_bellsouth.net
> > > Sent: Monday, 24 November 2003 3:04 PM
> > > To: vserver_at_list.linux-vserver.org
> > > Subject: Re: RE: [Vserver] Rpms for vserver 0.27 (got it)
> > >
> > >
> > > Hey Chuck,
> > >
> > > It worked out perfectly, and I know have it running on RH9
> > > (w/min.RH9 vserver). My question is how do I set the
> > > limitation for disk space, memory, and processes for a
> > > vserver. I noticed when I ssh/logged into the vserver that
> > > all the diskspace was available to the vserver. The thing I
> > > liked most about Freevps is that it had several perl scripts
> > > to setup, and monitor the vserver, is this possible with what
> > > I have now? I want to setup my vserver environments based on
> > > web hosting plan for vps services.
> > >
> > > I appreciate your help in getting me this far.
> > > Thanks
> > > TyroneM
> > >
> > > > From: "Charles Dale" <bug_at_aphid.net>
> > > > Date: 2003/11/23 Sun AM 09:04:27 EST
> > > > To: <vserver_at_list.linux-vserver.org>
> > > > CC: <mile1_at_bellsouth.net>
> > > > Subject: RE: [Vserver] Rpms for vserver 0.27 (got it)
> > > >
> > > > [Sorry accidentally sent this half way through writing it.]
> > > >
> > > > Hi Tyrone,
> > > >
> > > > Unfortunately the documentation is still under development
> > > so you'll
> > > > have to do a bit of work to understand how things function.
> > > That said,
> > > > there is some documentation already, could you start from there
> > > > and
> > > > let us know what you need explained more? Then perhaps we
> > > can fill in
> > > > the details for others too.
> > > >
> > > >
> > > > If you're not willing to get your hands dirty you might
> want to go
> > > > with Virtuozzo - the vserver project is not nicely
> polished like it
> > > > might be. But that's better, because you'll actually learn how
> > > > everything works, and so be able to fix it when it breaks!
> > > >
> > > > [Firstly: yes vservers work on RH9. You won't be able to
> > > use FreeVPS
> > > > though, you'll have to use the standard vserver patches and
> > > tools that
> > > > are available from linux-vserver.org. This means you can't
> > > use a Red
> > > > Hat modified kernel but that shouldn't be a problem
> (I'm running
> > > > my
> > > > vservers on RH9 with a vanilla kernel at the moment).]
> > > >
> > > > The Step-by-Step Guide[1] outlines the general steps required:
> > > > building a kernel, installing the vserver tools, then
> > > setting up your
> > > > vserver.
> > > >
> > > > Unfortunately the details aren't there, so you might have
> > > trouble if
> > > > you're not used to compiling your own kernel etc.
> > > >
> > > > The FAQ[2] contains lots of useful hints. For example it
> > > explains that
> > > > you need to enable the CAP_SYS_RESOURCE capability for
> > > vservers that
> > > > run BIND (that or recompile your BIND with
> --disable-linux-caps.)
> > > >
> > > > Also Jacques' paper on vserver[3] is awesome, it's worth a read
> > > > through.
> > > >
> > > > 1.
> http://www.linux-vserver.org/index.php?page=Step-by-Step+Guide
> > > > 2. http://www.linux-vserver.org/index.php?page=Linux-Vserver+FAQ
> > > > 3.
> > > >
> http://www.solucorp.qc.ca/miscprj/s_context.hc?prjstate=1&nodoc=0
> > > >
> > > > Hope this helps. Let us know any problems you have.
> > > >
> > > > Cheers,
> > > > Chuck
> > > >
> > > > > -----Original Message-----
> > > > > From: vserver-admin_at_list.linux-vserver.org
> > > > > [mailto:vserver-admin_at_list.linux-vserver.org] On Behalf Of
> > > > > mile1_at_bellsouth.net
> > > > > Sent: Sunday, 23 November 2003 4:52 PM
> > > > > To: vserver_at_list.linux-vserver.org
> > > > > Subject: Re: [Vserver] Rpms for vserver 0.27 (got it)
> > > > >
> > > > >
> > > > > Can I set the vservers up on rh9, or will they only work
> > > on rh7.3? I
> > > > > want to run plesk6 in a vserver, and run into
> problems with bind
> > > > > (capset failed), I currently tried this with Freevps on
> > > RH7.3. What
> > > > > will be the best way to go, without purchasing something like
> > > > > virtuozzo. There's a site called (jvds.com) with
> > > environment already
> > > > > built, but I dont understand how to setup and manage them, if
> > > > > you
> > > > > have any place information on where I can gain some
> > > knowledge please
> > > > > respond. Thanks TyroneM,
> > > > > >
> > > > > > From: Jacques Gelinas <jack_at_solucorp.qc.ca>
> > > > > > Date: 2003/11/22 Sat PM 10:16:21 EST
> > > > > > To: Vserver mailing list <vserver_at_dns.solucorp.qc.ca>
> > > > > > Subject: [Vserver] Rpms for vserver 0.27 (got it)
> > > > > >
> > > > > >
> > > > >
> > > >
> > > > _______________________________________________
> > > > Vserver mailing list
> > > > Vserver_at_list.linux-vserver.org
> > > > http://list.linux-vserver.org/mailman/listinfo/vserver
> > > >
> > >
> > > _______________________________________________
> > > Vserver mailing list
> > > Vserver_at_list.linux-vserver.org
> > > http://list.linux-> vserver.org/mailman/listinfo/vserver
> > >
> >
> > _______________________________________________
> > Vserver mailing list
> > Vserver_at_list.linux-vserver.org
> > http://list.linux-vserver.org/mailman/listinfo/vserver
> >
>
> _______________________________________________
> Vserver mailing list
> Vserver_at_list.linux-vserver.org
> http://list.linux-> vserver.org/mailman/listinfo/vserver
>
_______________________________________________
Vserver mailing list
Vserver_at_list.linux-vserver.org
http://list.linux-vserver.org/mailman/listinfo/vserver