About this list Date view Thread view Subject view Author view Attachment view

From: Stephan Sachse (listen_at_nugmbh.de)
Date: Tue 09 Sep 2003 - 13:26:25 BST


Hi,

i try out the per Context Quota and do the following steps.

* vanilla kernel 2.4.22 with alle patches from Herbert
* vserver-0.23

after reboot i setup the vroot with "vrsetup /dev/vroot/0 /dev/hda3"
(must i do that after every reboot??)

hda3 is mounted on /mnt/vserversa and alle vServer are linked to
/vservers. A second hd is mounted on /dec/vserversb.

now i use this command "chcontext --ctx 100 cqhadd -v /dev/hda3" to
activate the quota for vServer "v01" and start the vServer "v01"

"quotacheck -avgu" and "quotaon -avgu" all works fine.

now i setup a second vserver "v02" with the same userids and do the same
things for v02. Quota works fine ;)

I make some test an got many crashes (i make a Photo from that ;)) when
i do the "chcontext --ctx 100 cqhadd -v /dev/hda3" after i start the
vServer. Now i must wroth a script that adds the quota before the
vServer starts. But the Problem is the /dev/real/block/device. How can i
find out die real block device like /dev/hda3 for a vServer on demand
when the vServer starts.

cya later
/stephan

-- 
"Communication with an engineer is only slightly more difficult than
communication with the dead." -Lorren 'Rus' Stiles, Sr.


About this list Date view Thread view Subject view Author view Attachment view
[Next/Previous Months] [Main vserver Project Homepage] [Howto Subscribe/Unsubscribe] [Paul Sladen's vserver stuff]
Generated on Tue 09 Sep 2003 - 13:47:53 BST by hypermail 2.1.3